Thrust Reverser Return Filter Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-34-14
ALL ú ú N01 Page 403 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
D06765
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
Thrust Reverser Return Filter Installation
Figure 401 (Sheet 2)
D06776
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-34-14
ALL ú ú N01 Page 404 ú Jun 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 164-038-N00
(5)
Clean external surfaces around filter head and bowl.
S 024-026-N00
(6)
Remove the filter bowl and element from the return filter.
(a) Remove the filter bowl.
NOTE: The filter bowl is removed by turning it
____ counterclockwise. Use a 3/4-inch wrench if necessary.
(b)
Remove the filter element from the bowl. 1) Discard the element and the packing.
(c)
Remove the packing from the bowl cavity in the filter head. 1) Discard the packing.
S 214-032-N00
(7) Visually examine all parts (threads, seal surfaces, etc.) for damage or contaminants.
(a)
Replace all parts that are cracked, have damaged threads, and/or have damaged seal surfaces.
(b)
Clean all parts found to have contamination with Varsol. Use a brush to remove foreign matter.
(c)
Air dry parts in clean air.
S 414-033-N00
(8)
Install protection plugs into the bowl cavity in the filter head.
S 414-034-N00
(9)
Install protection cap into the filter bowl.
S 624-035-N00
(10)
Put parts in clean containers for protection (when installation of the parts will not be immediately done).
TASK 78-34-14-404-008-N00
3. Install the Return Filter
_________________________
A. Consumable Materials
(1)
D00153 Fluid - Hydraulic, Fire Resistant,
BMS 3-11
B.
References
(1)
AMM 27-62-00/201, Speed Brake Control System
(2)
AMM 29-11-00/201, Main Hydraulic Supply System
(3)
AMM 36-00-00/201, Pneumatic System
(4)
AMM 54-62-00/201, Nacelle Strut Access Doors
(5)
AMM 78-31-00/201, Thrust Reverser System
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-34-14
ALL ú ú N01 Page 405 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
(6)
IPC 78-31-55, Fig. 1
C.
Access
(1)
Location Zones
454 System 1 - Strut Aft Fairing
464 System 2 - Strut Aft Fairing
474 System 3 - Strut Aft Fairing
484 System 4 - Strut Aft Fairing
D.
Install the Return Filter (Fig. 401)
S 644-036-N00
CAUTION:_______ASSEMBLE PARTS IN A CLEAN AREA. MAKE SURE ALL DISASSEMBLED PARTS ARE PROTECTED FROM DAMAGE AND CONTAMINATION. CONTAMINATION CAN CAUSE THE FILTER TO OPERATE INCORRECTLY AFTER IT IS ASSEMBLED.
(1)
Lubricate the new packings, component threads, and seal surfaces with a thin layer of hydraulic fluid.
S 424-017-N00
(2)
Install the filter element in the filter bowl:
(a) Make sure packing (3) is installed in the new filter element (4).
NOTE: Packing (3) is supplied with the new filter element.
____
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EXHAUST 2(94)
