S 714-058-N02
(12)
Do this task: Thrust Reverser Operation - Deploy/Stow (Power Method) (AMM 78-31-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH ONE-WAY VALVE RESTRICTORS ú
78-34-02
ú CONFIG 2 ú N01 Page 408 ú Jun 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 044-059-N02
WARNING: DO THE DEACTIVATION PROCEDURE TO PREVENT THE OPERATION OF THE
_______ THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
(13)
Do the deactivation procedure for the thrust reverser for ground maintenance (AMM 78-31-00/201).
S 794-060-N02
(14)
Examine the flow control tee fittings for hydraulic fluid leaks.
F.
Put the Airplane Back to Its Usual Condition.
S 214-061-N02
CAUTION: MAKE SURE YOU REMOVE ALL TOOLS AND UNWANTED MATERIAL IN THE
_______ STRUT. IF YOU DO NOT DO THIS, DAMAGE TO THE ENGINE CAN OCCUR.
(1)
Make sure you remove all tools and unwanted material from the strut before you install the strut fairing panel(s).
S 414-062-N02
(2)
Install the forward fairing panel(s).
S 444-063-N02
(3)
Do the activation procedure for the thrust reverser
(AMM 78-31-00/201).
S 444-064-N02
(4)
Do the activation procedure for the Speed Brake Control System (AMM 27-62-00/501).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH ONE-WAY VALVE RESTRICTORS ú
78-34-02
ú CONFIG 2 ú N01 Page 409 ú Oct 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
REVERSE THRUST LEVER INTERLOCK ACTUATOR - REMOVAL/INSTALLATION
______________________________________________________________
1. General
_______
A. The reverse thrust lever interlock actuator is referred to as the interlock actuator in this procedure. This procedure has two tasks. The first task gives instructions to remove the interlock actuator. The second task gives instructions to install the interlock actuator.
B. The interlock actuator is a linear type actuator. It has a dc motor, which is part of it, to supply movement. It also has mechanical stops and limit switches to prevent movement that is more than the limit.
C. The interlock actuator uses approximately one second to extend or retract. In the retract position, the interlock actuator does not permit the reverser thrust lever to move until the two reverser sleeves have extended to approximately 60% of their full deployment. When the thrust reverser sleeves are at approximately 60% deployment, the EEC completes the electrical circuit to the interlock relay. The interlock relay will engerize, which will extend the interlock actuator. When the interlock actuator extends, the lock will be removed and the reverse thrust levers can move freely to the high power, reverse thrust position.
D. If you install a new interlock actuator, you must do the interlock actuator adjustment procedure (Ref 78-34-03/501).
TASK 78-34-03-004-001-N00
2. Remove the Reverse Thrust Lever Interlock Actuator
__________________________________________________
A. References
(1)
25-22-01/401, Main Deck Access Ceiling Panels
(2)
76-11-03/201, Control Stand
(3)
IPC 78-34-03, Fig. 5
B.
Access
(1)
Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
C.
Prepare to Remove the Interlock Actuator.
S 044-002-N00
WARNING: DO THE INTERLOCK ACTUATOR DEACTIVATION PROCEDURE TO PREVENT THE
_______ OPERATION OF THE INTERLOCK ACTUATOR. THE ACCIDENTAL OPERATION OF THE INTERLOCK ACTUATOR CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(1) Do this task: De-engergize the Reverse Thrust Lever Interlock Actuators (Ref 76-11-03/201)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EXHAUST 2(72)
