78-31-17
ALL ú ú N02 Page 411 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
~.............................................................................. | AMM | | AIPC | ................................................................................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 403 | 1 | Retainer | 78-31-01 | 10 | 230 | | | 1 | Retainer | | | 235 | | | 2 | Cap | | | 275 | | | 4 | Tube Assembly | | | 170 | | | 5 | Tubing, Rotary Flex | | | 190 | | | 7 | Actuator, Non-Locking | | | 290 | | | 8 | Sync Lock or | | | 280 | | | | Manual Drive Adapter | | | | 2.....….........…...................................…..........…......…........1
~.............................................................................. | AMM | | AIPC | ................................................................................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ......................................................................|......... | 404 | 1 | Tubing, Rotary Flex | 78-31-01 | 10 | 190 | | | 3 | Actuator, Non-Locking | | | 290 | | | 4 | Cap | | | 285 | | | 5 | Hose, Retract | | | 220 | | | 6 | Tube Assembly | | | 165 | | | 8 | Retainer | | | 230 | 2.....….........…...................................…..........…......…........1
D. References
(1)
AMM 24-22-00/201, Manual Control
(2)
AMM 27-62-00/201, Speed Brake Control System
(3)
AMM 27-81-00/201, Leading Edge Flap System
(4)
AMM 29-11-00/201, Main Hydraulic Supply System
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-17
ALL ú ú N02 Page 412 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(5)
AMM 71-11-04/201, Fan Cowl Panels
(6)
AMM 78-31-00/201, Thrust Reverser System
(7)
AMM 78-31-17/501, Thrust Reverser Hydraulic Actuators
(8)
AMM 78-36-01/401, Thrust Reverser Proximity Sensors
(9)
AMM 78-36-01/501, Thrust Reverser Proximity Sensors
(10)
IPC 78-31-01 Fig. 10
E.
Access
(1)
Location Zone
415 and 416 Engine 1 - Thrust Reverser Halves
425 and 426 Engine 2 - Thrust Reverser Halves
435 and 436 Engine 3 - Thrust Reverser Halves
445 and 446 Engine 4 - Thrust Reverser Halves
(2)
Access Panel
413 and 414 Fan Cowl Panels - Engine 1
423 and 424 Fan Cowl Panels - Engine 2
433 and 434 Fan Cowl Panels - Engine 3
443 and 444 Fan Cowl Panels - Engine 4
F.
Install the Locking Hydraulic Actuator (Fig. 401 and 402)
S 864-030-N00
(1)
Make sure the DO-NOT-OPERATE tags are installed on the forward thrust levers and the reverse thrust levers.
S 864-031-N00
(2)
Make sure the thrust reverser sleeve is extended approximately 1.0 inch (approximately 25.0 mm) or less from the fully stowed position.
S 224-088-N00
CAUTION: DO NOT PERMIT THE ROD END TO TURN WHEN YOU ATTACH IT TO THE
_______ THRUST REVERSER SLEEVE. IF THE ACTUATOR ROD END TURNS, YOU CAN CAUSE DAMAGE TO THE THRUST REVERSER OR THE ACTUATOR WHEN YOU OPERATE THE THRUST REVERSER.
(3) Do these steps to make sure the center locking actuator is fully retracted before you install it:
(a) Measure the clearance between the rod end collar and the actuator cylinder (dimension A in Fig. 401).
NOTE: Dimension A must be 0.010 - 0.018 inch (0.254-0.457 mm)
____ when the actuator is fully retracted. If the actuator is not in the specified limits, replace the actuator or adjust the actuator rod end. The actuator rod end is adjusted to make sure the end of the stop bracket slot does not prevent the movement of the feedback stop bolt.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EXHAUST 2(37)
