78-31-15
ALL ú ú N01 Page 601 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 866-017-N00
(2)
Make sure the forward thrust levers are in the idle position and
attach the DO-NOT-OPERATE tags.
S 866-018-N00
(3)
Make sure the reverse thrust levers are in the fully stowed position and attach the DO-NOT-OPERATE tags.
S 046-022-N00
WARNING: DO THE DEACTIVATION PROCEDURE FOR THE THRUST REVERSER TO
_______
PREVENT THE OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL
OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS
AND DAMAGE TO EQUIPMENT.
(4) Do the deactivation procedure for the thrust reverser for ground
maintenance (AMM 78-31-00/201).
NOTE: Do the deactivation procedure for the isolation valve only.
____ DO NOT put the streamered pins in the thrust reverser sleeves. You will need to manually extend and retract the thrust reverser sleeves in the steps that follow.
D. Do a Check of the Drag Links (Fig. 601)
S 016-035-N00
WARNING: DO NOT OPEN THE THRUST REVERSER HALVES TO EXAMINE THE DRAG
_______ LINKS. IF YOU DO, YOUR WEIGHT CAN CAUSE THE FAILURE OF THE HOLD-OPEN ROD WHEN YOU GO INTO THE FAN COWL. THE THRUST REVERSER HALVES WILL FALL TO THE CLOSED POSITION QUICKLY, WHICH CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) Go into the aft end of the fan cowl to get access to the drag links.
NOTE: Be careful when you get access to the drag links at the top
____ of the thrust reverser. Push on the opposite sides of the inner walls of the fan cowl with your hands and feet while you lift your body up. Do not pull on the drag links or you will cause damage to them.
S 216-006-N00
(2) Examine the end of the drag link at the anchor fitting of the fan
cowl.
(a) FOR ANCHOR FITTINGS WITH THE ANTI-ROTATION CLIP; Do as follows: 1) Make sure the bushing through the drag link and the fitting
on the fan cowl is not damanged or worn.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-15
ALL ú ú N01 Page 602 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
7. FITTING/ BUSHING
8. BUSHING/ PIN
1. BUSHING/PIN
2. DRAG LINK/ BUSHING
SEE SEE A B WITHOUT ANTI-ROTATION CLIP DRAG LINK ANCHOR FITTING A
(12 LOCATIONS) BLOCKER DOOR 3. DRAG LINK/ BEARING RACE
6. BUSHING/BOLT 4. BEARING RACE/ SPHR BEARING
DRAG LINK 9. PIVOT BOLT LINK/
SEE C
5. SPHR BEARING/BOLT
BLOCKER DOOR OPEN (VIEW IN FORWARD DIRECTION) DOUBLE-LUG PIVOT LINK
B C
Blocker Door Drag Link Wear Limits
Figure 601 (Sheet 1)
C58567
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-15
ALL ú ú N01 Page 603 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
NO. INDEX PART NAME DIM. DESIGN LIMITS WEAR LIMITS PART WORN REPLACE PART WORN REPAIR INSTR REPAIR
DIAMETER PER-MITTED WEAR DIM. ANCE CLEAR-MAX DIA
MIN MAX
1 BUSHING ID 0.5000 0.5007 0.5020 0.0030 X
BOLT OD 0.4990 0.4995 0.4975 X 1
2 DRAG LINK ID 0.6250 0.6256 -- -0.0000 X 1
BUSHING OD 0.6261 0.6267 -- X
3 DRAG LINK ID 0.9063 0.9070 -- 0.0020 X 1
BEARING RACE OD 0.9057 0.9062 -- X 2
4 BEARING RACE ID 0.6990 0.6995 0.7075 RADIAL 0.0060 0.0080 X
SPHR BEARING OD 0.6975 0.6980 -- X
5 SPHR BEARING ID 0.3750 0.3754 0.3770 AXIAL X
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EXHAUST 2(23)
