(e)
P7 Overhead Circuit Breaker Panel
1) 7F9 EIU L
2) 7F10 EIU C
3) 7F15 EIU R
S 864-003-N00
(2) For the right 2.9 bleed valve, open these circuit breakers for the applicable engine and attach the DO-NOT-CLOSE tags:
(a) P6 Main Power Distribution Panel
1) 6F1 IGN 1 ENG 1
2) 6F2 IGN 1 ENG 2
3) 6F3 IGN 1 ENG 3
4) 6F4 IGN 1 ENG 4
5) 6G19 STBY IGN ENG 1
6) 6G20 STBY IGN ENG 2
7) 6G21 STBY IGN ENG 3
8) 6G22 STBY IGN ENG 4
9) 6H32 AIR SUPPLY CONT ENG 1
10) 6H33 AIR SUPPLY CONT ENG 2
11) 6H34 AIR SUPPLY CONT ENG 3
12) 6H35 AIR SUPPLY CONT ENG 4
13) 6K19 IGN 2 ENG 1
14) 6K20 IGN 2 ENG 2
15) 6K21 IGN 2 ENG 3
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-32-03
ALL ú ú N01 Page 405 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
16) 6K22 IGN 2 ENG 4
(b)
P7 Overhead Circuit Breaker Panel
1) 7J2 HYDRAULICS EDP DEPRESS 1
2) 7H2 HYDRAULICS EDP DEPRESS 2
3) 7G2 HYDRAULICS EDP DEPRESS 3
4) 7F2 HYDRAULICS EDP DEPRESS 4
(c)
P180 DC Power Distribution Panel
1) 180C8 GCU 1
or
180M4 GCU 1
2) 180C9 GCU 2
or
180M5 GCU 2
3) 180C10 GCU 3
or
180M6 GCU 3
4) 180C11 GCU 4
or
180M7 GCU 4
5) 180C12 GEN DRIVE DISC 1
or
180L4 GEN DRIVE DISC 1
6) 180C13 GEN DRIVE DISC 2
or
180L5 GEN DRIVE DISC 2
7) 180C14 GEN DRIVE DISC 3
or
180L6 GEN DRIVE DISC 3
8) 180C15 GEN DRIVE DISC 4
or
180L7 GEN DRIVE DISC 4
S 014-034-N00
(3) Open the fan cowl panel (AMM 71-11-04/201).
S 044-045-N00
WARNING: DO THE THRUST REVERSER DEACTIVATION PROCEDURE TO PREVENT THE
_______ OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(4)
Do this procedure: Thrust Reverser Deactivation for Ground Maintenance (AMM 78-31-00/201).
(5)
Open the core cowl panel (AMM 71-11-06/201).
S 014-035-N00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-32-03
ALL ú ú N01 Page 406 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 014-046-N00
WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU OPEN THE
_______
THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS,
INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
(6)
Open the thrust reverser (AMM 78-31-00/201).
E.
Procedure
S 024-054-N00
(1) Remove the 2.9 Bleed Valve:
(a)
For the right 2.9 bleed valve, remove the 2.9 bleed duct with the steps that follow: 1) Remove the bolts and nuts which attach the 2.9 bleed duct,
ground bracket, and support bracket for the wire bundle to the 2.9 bleed valve. 2) Remove the 2.9 bleed duct.
(b)
For the left 2.9 bleed valve, remove the 2.9 bleed duct with the steps that follow: 1) Remove the bolts and nuts which attach the 2.9 bleed duct,
ground bracket, harness support bracket, and support bracket for the fire detector to the top flange of the 2.9 bleed valve.
2) Remove the 2.9 bleed duct.
(c)
If it is installed, remove the bolts and the cover from the boss on the side of the 2.9 bleed valve.
(d)
Disconnect the signal tube for the 2.9 bleed valve from the adapter on the 2.9 bleed valve. 1) Install the protection caps on the signal tube.
(e)
For the right 2.9 bleed valve, remove the bolts and nuts which attach the burner pressure tube and servo air tubes to the bracket on the lower flange of the 2.9 bleed valve.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 大氣 AIR 2(72)
