(h)
Tighten the forward jamnut against the aft support bracket to 675-750 pound-inches (76.3-84.7 newton-meters) while you hold the aft jamnut with a wrench.
(i)
Make sure again that the TCC air valve actuator has not moved from its position against the forward bracket stop and that the coupling nut turns freely.
(j)
Safety the jamnuts at the aft support bracket with lockwire.
(k)
Tighten the coupling nut at the forward end of the control cable to 100-175 pound-inches (11.3-14.1 newton-meters). 1) Safety the coupling nut with lockwire.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-24-11
ALL ú ú N01 Page 405 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
(l) Attach the control cable to the two adjustable brackets with the steps that follow: 1) If necessary, install the two clamps on the control cable
at each bracket location.
2) If the installation of the clamps to the brackets will apply tension to the control cable, adjust the brackets with the steps that follow: a) Loosen the jamnuts of the applicable turnbuckles. b) Adjust the applicable turnbuckles as necessary to
remove the tension on the control cable. c) Lubricate the threads of the turnbuckle ends with engine oil. d) Tighten the jamnuts to 14-16 pound-inches (1.6-1.8 newton-meters). e) Safety the jamnuts with lockwire. 3) Lubricate the threads of the bolts, which attach the control cable clamps, with engine oil.
4) Attach the control cable clamps to the brackets with the bolts and nuts. a) Tighten the bolts to 85-95 pound-inches (9.6-10.7
newton-meters).
(m) Do the adjustment of the turbine cooling system (AMM 75-24-00/501).
NOTE: The bolt and nut that connect the cable rod end to the
____ idler arm of the shutoff valve for the HPT case cooling air, will be installed during the adjustment procedure.
F. Return the Aircraft to Its Usual Condition.
S 414-030-N00
WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU CLOSE THE
_______ THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
(1) Close the right thrust reverser (AMM 78-31-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-24-11
ALL ú ú N01 Page 406 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(2) S 414-025-N00Close the right core cowl panel (AMM 71-11-06/201).
(3) S 414-026-N00Close the right fan cowl panel (AMM 71-11-04/201).
(4) S 444-027-N00Do the activation procedure for the thrust reverser (AMM 78-31-00/201).
(5) S 714-017-N00Do the test of the TCC air valve control cable that is shown in the Power Plant Test Reference Table (AMM 71-00-00/501).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-24-11
ALL ú ú N01 Page 407 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
TURBINE CASE COOLING (TCC) CONTROL CABLE BALL JOINT ASSEMBLY -
____________________________________________________________ REMOVAL/INSTALLATION
____________________
TASK 75-24-12-004-001-N00
1. Remove the TCC Control Cable Ball Joint Assembly (Fig. 401)
________________________________________________
A. References
(1)
AMM 71-11-04/201, Fan Cowl Panels
(2)
AMM 71-11-06/201, Core Cowl Panels
(3)
AMM 78-31-00/201, Thrust Reverser System
B.
Access
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 大氣 AIR 2(5)
