曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 ALL  ú ú 06 Page 516 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 8) 6K21, IGN 2 ENG 3
 9) 6G21, STBY IGN ENG 3
 10) 6F4, IGN 1 ENG 4
 11) 6K22, IGN 2 ENG 4
 12) 6G22, STBY IGN ENG 4
 13) 6H1, FIRE EXTINGUISHER ENG 1&3 B
 14) 6H2, FIRE EXTINGUISHER ENG 1&3 A
 15) 6H3, FIRE EXTINGUISHER ENG 2&4 B
 16) 6H4, FIRE EXTINGUISHER ENG 2&4 A
 17) 6H5, FIRE EXTINGUISHER APU
 18) 6H6, FIRE EXTINGUISHER LOWER CARGO

 S 865-145
 (4) Remove electrical power if it is not necessary (AMM 24-22-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 26-21-01
 ALL  ú ú 03 Page 517 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 SQUIB TEST MODULE - REMOVAL/INSTALLATION
________________________________________
 1.  General_______
 A.  This procedure contains two tasks. The first task removes the Squib Test Module, M7327. The second task installs the Squib Test Module and makes sure it operates correctly.
 B.  The Squib Test Module is installed on the overhead maintenance panel, P461.
 TASK 26-21-02-004-001
 2.  Remove the Squib Test Module (Fig. 401)____________________________
 A.  References
 (1)  
24-22-00/201, Manual Control

 (2)  
IPC 26-21-02 Fig. 1

 (3)  
WDM 26-21-01 thru 26-21-04

 B.  Access
 (1)  Location Zone
 220 Control Cabin

 C.  Procedure
 S 864-002
 (1)  
Supply electrical power (Ref 24-22-00/201).

 S 864-003

 (2)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  P6 Main Power Distribution Panel 1) 6H1, FIRE EXTINGUISHER ENG 1&3 B 2) 6H2, FIRE EXTINGUISHER ENG 1&3 A 3) 6H3, FIRE EXTINGUISHER ENG 2&4 B 4) 6H4, FIRE EXTINGUISHER ENG 2&4 A 5) 6H5, FIRE EXTINGUISHER APU 6) 6H6, FIRE EXTINGUISHER LOWER CARGO

 (3)  
Remove the screws that hold the module (4 locations).

 S 034-005

 (4)  
Pull the module out until you can get access to the electrical connectors, DM7327 (3) at the rear.

 S 034-004
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 26-21-02
 ALL  ú ú 01 Page 401 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

FLIGHT COMPARTMENT

A

Squib Test Module Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 26-21-02
 ALL  ú ú 01 Page 402 ú Jun 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 034-015
 (5)
Hold the module and disconnect the electrical connectors.

 S 024-006

 (6)  
Remove the module from the panel.

 TASK 26-21-02-404-007
 3.  Install the Squib Test Module (Fig. 401)_____________________________
 A. References
 (1)  
24-22-00/201, Manual Control

 (2)  
IPC 26-21-02 Fig. 1

 (3)  
WDM 26-21-01 thru 26-21-04

 B. Access
 (1)  Location Zone
 220 Control Cabin

 C. Procedure
 S 434-008
 (1)  
Hold the module and connect the electrical connectors, DM7327A, DM7327B, and DM7327C at the rear.

 S 424-009

 (2)  
Carefully push the module into its correct position.

 S 434-010

 (3)
Attach the module to the panel with the screws (4 locations).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 防火 FIRE PROTECTION 2(80)