(2)
X441, X442, and X443 for generator 2

 (3)
X444, X445, and X446 for generator 3

 (4)
X438, X439, and X440 for generator 4.

 C.  
The lightning protectors are installed in the four generator power center panels (P514, P515, P614, and P615) in the E/E compartment.

 D.  
Access to the E/E compartment is through a door behind the nose wheel or through the forward cargo compartment.

 TASK 24-21-04-004-001
 2.  Lightning Protector Removal (Fig. 401)___________________________
 A.  References
 (1)
24-22-00/201, Manual Control

 (2)
IPC 24-21-04 Fig. 1

 (3)
IPC 24-21-04 Fig. 2

 (4)
IPC 24-21-04 Fig. 3

 (5)
IPC 24-21-04 Fig. 4

 (6)
WDM 24-22-11, 24-22-12, 24-22-13, 24-22-14

 (7)
SSM 24-22-01

 B.  
Access

 (1)  
Location Zone 117 Electrical and Electronics Compartment, LH 118 Electrical and Electronics Compartment, RH

 (2)  
Access Panel
 P514 Generator 1 Power Center - Left
 P614 Generator 2 Power Center - Left
 P515 Generator 3 Power Center - Right
 P615 Generator 4 Power Center - Right

 C.  
Procedure

 (1)
Make sure all electrical power is off (Ref 24-22-00/201).

 S 864-002
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 24-21-04
 ALL  ú ú 03 Page 401 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
SEE B
LIGHTNING PROTECTOR LIGHTNING PROTECTOR
GEN 1-PHASE B GEN 1-PHASE A
(X436) (X435)
SEE C LIGHTNING PROTECTOR SEE C GEN 1-PHASE C (X437)
SEE C
P514 SEE A
P614
LIGHTNING PROTECTOR GEN 2-PHASE A
LIGHTNING PROTECTOR
(X441)  LIGHTNING PROTECTOR
GEN 2-PHASE B GEN 2-PHASE C
SEE C (X442)
(X443) SEE C
SEE C
LIGHTNING PROTECTORP514 AND P614 GENERATOR GEN 3-PHASE A
1 AND 2 POWER CENTER-LEFT
LIGHTNING PROTECTOR(X444) GEN 3-PHASE B
LIGHTNING PROTECTOR  ASEE C (X445)
GEN 3-PHASE C SEE C (X446)
SEE C
P515
P615
LIGHTNING PROTECTOR
GEN 4-PHASE C

LIGHTNING PROTECTOR
(X440) GEN 4-PHASE B
LIGHTNING PROTECTOR
SEE C (X439)

GEN 4-PHASE A SEE C (X438) LIGHTNING PROTECTOR (TYPICAL)
SEE C
P515 AND P615 GENERATOR
3 AND 4 POWER CENTER-RIGHT

C
B
Lightning Protector Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 24-21-04
 ALL  ú ú 01 Page 402 ú Oct 10/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (2)  S 864-003Make sure the BATTERY switch, on the P5 panel, is set to OFF and attach a DO-NOT-OPERATE tag.
 (3)  S 014-004Open the applicable panel (in the list below) to get access to the lightning protector.
 ~....................................... | Equipment Number | ......................................... | Lightning | Phase | Panel | | Protector | | | ......................................... | X435 | A | P514 | | X436 | B | P514 | | X437 | C | P514 | | X438 | A | P615 | | X439 | B | P615 | | X440 | C | P615 | | X441 | A | P614 | | X442 | B | P614 | | X443 | C | P614 | | X444 | A | P515 | | X445 | B | P515 | | X446 | C | P515 | 2............….............…............1
 (4)  S 034-005Disconnect the electrical leads from the X1 and X2 terminals on the lightning protector.
 (5)  S 034-006Remove the two screws that attach the lightning protector to the panel.
 (6)  S 024-007Remove the lightning protector from the panel.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 ELECTRICAL POWER 電源 1(91)