(b)
If the screw removal tool is not available do these steps (Fig. 403): 1) Hit the QAD attachment screws with a flat punch. 2) Use a pointed punch to remove the screw.
(c)
If the screws are not removed, use a screw extractor to remove the screws.
(4)
Remove the QAD ring.
S 024-005
TASK 24-11-08-404-006
3. IDG Quick Attach-Detach (QAD) Ring Installation (Fig. 401)_______________________________________________
A. Consumable Materials
(1) Anti-Seize Compound - Bostic Never-Seez NSBT-8N Pure Nickel Special
B. References
(1)
AMM 24-11-01/401, Integrated Drive Generator
(2)
AMM 78-31-00/201, Thrust Reverser System
(3)
AIPC 24-11-01, Fig. 2
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-11-08
ALL ú ú 02 Page 406 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
C. Access
(1)
Location Zone
412 Engine 1 - Main Gearbox Aft Face 7 o'clock
422 Engine 2 - Main Gearbox Aft Face 7 o'clock
432 Engine 3 - Main Gearbox Aft Face 7 o'clock
442 Engine 4 - Main Gearbox Aft Face 7 o'clock
(2)
Access Panel
415 Left Thrust Reverser Half - Engine 1
425 Left Thrust Reverser Half - Engine 2
435 Left Thrust Reverser Half - Engine 3
445 Left Thrust Reverser Half - Engine 4
D.
Procedure
S 424-016
(1) Install the QAD ring.
CAUTION:_______DO NOT APPLY TOO MUCH OIL. THE OIL CAN CAUSE A HYDRAULIC EFFECT IN THE DOWEL PIN HOLES. DAMAGE TO THE GEARBOX CAN OCCUR WHEN YOU TIGHTEN THE BOLTS.
(a) Apply a thin layer of oil to these areas:
1) Around the bolt holes on the gearbox 2) Around the holes on the gasket side of the QAD ring (oil is applied from the holes to the inner edge of the QAD ring).
CAUTION:_______DO NOT APPLY TOO MUCH ANTI-SEIZE. THE ANTI-SEIZE CAN CAUSE A HYDRAULIC EFFECT IN THE BOLT HOLES. DAMAGE TO THE GEARBOX CAN OCCUR WHEN YOU TIGHTEN THE BOLTS.
(b)
Apply a thin coat of anti-seize to the threads and under the head of the bolt.
(c)
Put the QAD ring and the gasket (with the gasket on the gearbox side) in their positions on the main gearbox.
(d)
Align the QAD ring to make sure the word "TOP" on the adapter plate is at the 12 o'clock position.
(e)
Install the eight bolts that attach the QAD ring to the gearbox.
(f)
Tighten the QAD bolts in 2 steps as follows (Fig. 402): 1) Tighten the bolts in a star pattern and initial torque of 135-150 pound-inch.
2) Tighten the bolts in a star pattern and torque to a final torque of 276-300 pound-inches (31.2-33.9 N.m.).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-11-08
ALL ú ú 02 Page 407 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
CAUTION:_______ CLEAN THE EXCESS THE ANTI-SEIZE FROM THE QAD ADAPTER PLATE. THE ANTI-SEIZE MIXED WITH IDG OIL MAY CAUSE DAMAGE TO THE IDG.
3) Use a clean dry cloth to wipe the excess anti-seize from the QAD.
(2) S 414-013Install the IDG (AMM 24-11-01/401).
(3) S 414-014Close the left thrust reverser half (AMM 78-31-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-11-08
ALL ú ú 02 Page 408 ú Oct 18/00
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 ELECTRICAL POWER 電源 1(47)
