23.
 AFT LINK BEARING RACE/ AFT LINK BEARING BALL

21. AFT LINK BUSHING/BOLT
20. AFT LINK/ AFT LINK BUSHING
D-D
NOTE: BOLT RETAINER NOT SHOWN FOR CLARITY
Engine Mounts Inspection
Figure 601 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-21-00
 ALL  ú ú C01 Page 604 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////

NOTE: ALL DIMENSIONS ARE IN INCHES.
Engine Mounts Inspection Figure 601 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-21-00
 ALL  ú
 ú  C01  Page 605
 ú  Mar 15/96 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////

____ALL DIMENSIONS ARE IN INCHES.
NOTE:
Engine Mounts Inspection Figure 601 (Sheet 5)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-21-00
 ALL  ú
 ú  C01  Page 606
 ú  Mar 15/96 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////

NOTE: ALL DIMENSIONS ARE IN INCHES.

REPLACE FAN FRAME SUPPORT REPLACE CONE BOLT REPLACE THRUST LINK REPLACE FAN FRAME FITTING REPLACE EVENER BAR REPLACE THRUST FITTING REPLACE AFT LINK ENGINES WITH P/N S302A004-5 HANGER FITTING ENGINES WITH P/N 310A1028-1 HANGER FITTING
Engine Mounts Inspection
Figure 601 (Sheet 6)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-21-00
 ALL  ú
 ú  C01  Page 607
 ú  Mar 15/96 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 216-010-C00
 (3)  ON ENGINES WITH P/N 310A1028 HANGAR FITTING; examine the conical surface of the hangar fitting from the aft mount for pits or galling. (a) If the damage is more than 20 percent of the surface area, replace the hangar fitting. (b) If a single defect extends more than 0.3 inch (7.6 mm) in any direction, replace the hangar fitting.
 S 036-004-C00
 (4)  Remove and disassemble the components that follow: (a) The forward mount (AMM 71-21-01/401) (b) The thrust link assembly (AMM 71-21-02/401). (c) The aft engine mount (AMM 71-21-03/401).
 S 226-005-C00
 (5)  Examine the wedge surfaces on the fail-safe fitting of the thrust link assembly for worn areas, pits or galling. (a) If the damage is more than 10 percent of the contact area on one of the four wedge surfaces to a depth of 0.005 inch (0.127 mm), replace the fail-safe fitting.
 S 236-009-C00
 (6)  Do a penetrant inspection of the five bolts that attach the thrust link assembly to the strut (AMM 70-40-01/201).
 S 226-006-C00
 (7)  Do a check for worn areas and clearances of the engine mounts (Fig. 601).
 S 436-007-C00
 (8)  Assemble and install the components that follow: (a) The forward engine mount (AMM 71-21-01/401). (b) The thrust link assembly (AMM 71-21-02/401). (c) The aft engine mount (AMM 71-21-03/401).
 S 416-008-C00
 (9)  Install the power plant (AMM 71-00-02/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 動力裝置 POWER PLANT 2(149)