29-18-00
 ALL  ú ú 01 Page 2 ú Feb 25/85
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 RESERVOIR MANUAL FILL PUMP - REMOVAL/INSTALLATION
_________________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. There is a task for the removal and a task for the installation of the reservoir manual fill pump.
 TASK 29-18-11-004-001
 2.  Reservoir Manual Fill Pump Removal (Fig. 401)__________________________________
 A.  Standard Tools and Equipment
 (1)  Container to catch hydraulic fluid
 B.  References
 (1)  12-40-00/201, Cleaning and Washing
 C.  Access
 (1)  Location Zone
 217 Main Wheel Well, RH

 D.  Procedure
 S 864-003
 (1)  
Make sure the hydraulic reservoir fill selector valve is CLOSED.

 S 034-004

 (2)
Disconnect the inlet and outlet lines from the hydraulic pump.

 S 684-005

 (3)  
Drain the hydraulic fluid into a container.

 S 164-009

 (4)  
Clean all hydraulic fluid from the installation area if it is necessary (Ref 12-40-00/201).

 (5)  
Install caps on the hydraulic lines.

 (6)  
Install covers on the pump inlet and outlet ports.

 (7)  
Remove the mounting bolts.

 S 434-010
 S 434-006
 S 034-008
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-18-11
 ALL  ú ú 01 Page 401 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500
MAINTENANCE MANUAL

SEE A FILL PUMP RESERVOIR MANUAL 
SELECTOR VALVE RESERVOIR FILL 
RESERVOIR FILL FILTER MODULE  RESERVOIR MANUAL PUMP FILL 
BOLTS MOUNTING  O-RING UNION  HANDLE PUMP 
CONNECTION FILL PRESSURE 
LINE FILL 
FWD  HOSE SUCTION 
O-RING UNION  RESERVOIR MANUAL FILL PUMP 
A 
Figure 401 Reservoir Manual Fill Pump 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-18-11
 ALL  ú ú 01 Page 402 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 024-007
 (8) Remove the pump.
 TASK 29-18-11-404-002
 3.  Reservoir Manual Fill Pump Installation (Fig. 401)_______________________________________
 A. Consumable Materials
 (1)
D00567 Skydrol Assembly Lube - MCS 352

 (2)
D00568 Fluid - Hydraulic, BMS 3-11

 B. References
 (1) AMM 12-12-00/301, Hydraulic Reservoir
 C. Access
 (1)  Location Zone
 217 Main Wheel Well, RH

 D. Procedure
 S 034-011
 (1)
Remove the covers from the pump inlet and outlet ports.

 S 644-012

 (2)
Apply assembly lube or hydraulic fluid to the O-rings and unions.

 S 434-013

 (3)
Install the O-rings and unions in the inlet and outlet ports.

 S 424-014

 (4)
Put the pump in its mouning position.

 (5)
Install the pump with the bolts and washers.

 (6)
Remove the caps from the hydraulic lines.

 (7)
Connect hydraulic lines to the inlet and outlet ports.

 S 424-015
 S 034-016
 S 434-017
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-18-11
 ALL  ú ú 01 Page 403 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (8)  S 614-015Pump a small quantity of fluid through the pump (AMM 12-12-00/301).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 液壓 HYDRAULIC POWER(129)