SYSTEM B FILTER MODULE
C Hydraulic Systems A and B Return Filter Servicing Figure 201 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-15-61
 ALL  ú ú 01 Page 203 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
PORT 3

D

Hydraulic Systems A and B Return Filter Servicing
Figure 201 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-15-61
 ALL  ú ú 01 Page 204 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (2)  D00568 Fluid - Hydraulic, BMS 3-11
 B. References
 (1)  
12-12-00/301, Hydraulic Reservoir

 (2)  
29-09-00/201, Hydraulic Reservoir Pressurization System

 C. Access
 (1)  Location Zone
 216 Main Wheel Well, LH
 217 Main Wheel Well, RH

 D. Procedure
 S 422-009
 (1)  Install the filter element:
 (a)  
Apply assembly lube or hydraulic fluid to the O-rings.

 (b)  
Install the O-rings.

 (c)  
Put the filter element in the filter bowl.

 (d)  
Install the filter bowl in the filter head.

 (e)  
Install the coupling band around the filter bowl and the filter head.

 (f)  
Tighten the coupling band to 120-144 pound-inches ( for filter assembly from Pall Aeropower Corp.) or 60-70 pound-inches (for filter assembly from PTI Technologies).

 S 862-010
 (2)
Push the differential pressure indicator if it is necessary.

 S 862-011

 (3)  
Pressurize the hydraulic reservoirs (Ref 29-09-00/201).

 (4)  
Examine the filter module for leaks.

 (5)
Do the servicing for the hydraulic reservoir (Ref 12-12-00/301).

 S 792-012
 S 612-013
 TASK 29-15-61-002-001
 4.  Return Filter Module Removal (Fig. 201)____________________________
 A. References
 (1)  12-40-00/201, Cleaning and Washing
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-15-61
 ALL  ú ú 01 Page 205 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (2)  
29-09-00/201, Hydraulic Reservoir Pressurization System

 (3)  
29-15-00/201, Hydraulic Systems A, B and Standby

 B. Access
 (1)  Location Zone
 216 Main Wheel Well, LH
 217 Main Wheel Well, RH

 C. Procedure
 S 862-014
 (1)
Remove power from the hydraulic system (Ref 29-15-00/201).

 S 862-015

 (2)  
Release pressure from the hydraulic reservoir (Ref 29-09-00/201).

 S 032-016

 (3)  
Disconnect the hydraulic lines from the filter module.

 S 682-017

 (4)  
Drain the hydraulic fluid into a container.

 S 162-018

 (5)  
Clean all hydraulic fluid from the installation area if it is necessary (Ref 12-40-00/201).

 S 432-019

 (6)  
Install plugs on the disconnected hydraulic line.

 S 032-020

 (7)  
Remove the mounting bolts.

 (8)  
Remove the filter module.

 S 022-021
 TASK 29-15-61-402-002
 5.  Return Filter Module Installation (Fig. 201)_________________________________
 A. Consumable Materials
 (1)  D00567 - Skydrol Assembly Lube - MCS 352
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 液壓 HYDRAULIC POWER(113)