(e)  
Remove the bolts.

 (f)  
Remove the reservoir.

 S 024-004
 (2)  Remove the hydraulic fluid quantity transmitter (Ref 29-33-12/401).
 TASK 29-15-41-404-002
 3.  Hydraulic Systems A and B Reservoirs Installation (Fig. 401)_________________________________________________
 A. Consumable Materials
 (1)  
D00567 Skydrol Assembly Lube - MCS 352

 (2)  
D00568 Fluid - Hydraulic, Fire Resistant - BMS 3-11

 B. References
 (1)  
12-12-00/301, Hydraulic Reservoir

 (2)  
29-09-00/201, Hydraulic Reservoir Pressurization System

 (3)  
29-33-12/401, Hydraulic Fluid Quantity Transmitter

 C. Access
 (1)  Location Zone
 216/217 Main Wheel Well

 D. Prepare for Installation
 S 214-010
 (1)  
Make sure the reservoir surfaces are clean.

 (2)
Make sure that unwanted material does not get in the reservoir.

 S 214-011
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-15-41
 ALL  ú ú 01 Page 404 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 434-012
 (3) Install the drain valve if it is not installed on the reservoir:
 (a)  
Apply assembly lube or hydraulic fluid to the O-ring.

 (b)  
Install the O-ring in the groove of the drain valve flange.

 (c)  
Put the drain valve on the flange.

 (d)  
Install the bolts.

 (e)  
Install the lockwire.

 (f)  
Put the drain valve handle in the CLOSED position.

 (g)  
Install the lockwire.

 S 644-015
 (4)  
Apply assembly lube or hydraulic fluid to the O-rings, unions, and reducers.

 S 434-009

 (5)
Install the O-rings, unions, and reducers in the reservoir ports.

 S 424-008

 (6)  
Install the hydraulic fluid quantity transmitter (Ref 29-33-12/401).

 E. Procedure
 S 424-005
 (1)  
Install the hydraulic reservoir:

 (a)  
Put the hydraulic reservoir in its mounting position.

 (b)  
Install the bolts.

 (c)  
Connect the electrical connector to the fluid quantity transmitter.

 (d)  
Connect all the hydraulic lines to the hydraulic reservoir.

 (e)  
Connect the reservoir pressurization line.

 (f)  
Connect the pressurization line clamp and shim.

 (2)
Do the servicing for the hydraulic reservoir (Ref 12-12-00/301).

 (3)  
Pressurize the hydraulic reservoir (Ref 29-09-00/201).

 S 614-010
 S 864-011
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-15-41
 ALL  ú ú 01 Page 405 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (4)  S 794-012Do a check for leaks.
 (5)  S 934-013Remove the DO-NOT-OPERATE tags from the hydraulic pump switches.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-15-41
 ALL  ú ú 01 Page 406 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 STANDBY HYDRAULIC SYSTEM RESERVOIR - REMOVAL/INSTALLATION
_________________________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. There is a task for the removal and a task for the installation of the standby hydraulic system reservoir.
 B.  The standby reservoir is installed on the keel beam between the left and right wheel wells.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 液壓 HYDRAULIC POWER(109)