(2)
The CSD installation.
B.
You can remove and install the CSD and the AC generator as a completed assembly or as divided units. If you do not have the adapter tool, it will be easier to remove and install one unit at a time. The CSD is attached to the accessory gearbox of the engine by a quick-attach-detach (QAD) ring.
C.
When you replace the CSD, also replace the line oil filter element
ú (AMM 24-11-31/201). Examine the CSD oil, both the integral and line oil filter elements, and the magnetic plug. Flush the oil cooler if any of the items that were examined show signs of sludge. Replace the oil cooler and the tubing if bright metallic particles or flakes are on the magnetic plug. When you replace the CSD because of internal failure, replace the oil cooler and the tubing for the oil cooler. Make sure that the CSD has no worn areas (AMM 24-11-11/601).
TASK 24-11-11-004-001-001
2. Generator Constant Speed Drive Removal (Fig. 401)
______________________________________
A. Special Tools and Equipment
(1) F70333-24 - Adapter, Constant Speed Drive and AC Generator
NOTE: Boeing F70333-24 consists of a commercially available
____ jack plus the F70333-25 Adapter Assembly. The F70333-24 holds the CSD and generator during removal and installation.
B. References
(1)
AMM 12-13-21/301, Constant Speed Drive
(2)
AMM 24-21-11/401, Engine Drive Generator
(3)
AMM 24-22-00/201, Manual Control
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH CONSTANT SPEED DRIVES ú
24-11-11
ú CONFIG ú 01.1 Page 401 ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
1. CSD
2. GENERATOR SEE A
QAD RING SEE B
2. GENERATOR
1. CONSTANT SPEED DRIVE
A
CSD and Generator Parts Figure 401 (Sheet 1)
A60380
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH CONSTANT SPEED DRIVES ú
24-11-11
ú CONFIG ú 01 Page 402 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
CONSTANT SPEED DRIVE
(CSD) O-RING
RETAINER
SEE C SWIVEL NUT RETAINED IN LOCKING RING BOSS
SEE D
QAD RING
LOCATING PIN
O-RING QAD ADAPTER
(0.139 INCH DIA GASKET
CROSS SECTION)
LOCKING
LUGS ON CSD
QAD LOCKING LUGS
O-RING
(0.103 INCH DIA
O-RING CROSS SECTION)
RETAINER
TENSION MOUNTING PAD FWD
BOLT ADAPTER PLATE
BRACKET B
NOTE:____ THIS DETAIL ROTATED TO SHOW
TENSION BOLT MORE CLEARLY.
C
TENSION BOLT
D LOCATING PIN
NOTE:____ TENSION BOLT, ETC. TRUE ORIENTATION OF THIS VIEW SHOWS
CSD and Generator Parts Figure 401 (Sheet 2)
A60381
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH CONSTANT SPEED DRIVES ú
24-11-11
ú CONFIG ú 01 Page 403 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C.
D.
E.
A
737-300/400/500MAINTENANCE MANUAL
(4)
AMM 71-11-02/201, Fan Cowl PanelsAccess
(1) 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 電源 ELECTRICAL POWER(29)
