S 866-011
(6) Remove the DO-NOT-OPERATE tag from the BATTERY switch.
(a) Supply electrical power to charge the battery
(AMM 24-22-00/201).
S 716-013
(7)
Do this task: "Charge Mode Test" in the Operation Test (AMM 24-31-21/501).
(8)
Set the clock GMT and DATE (AMM 31-25-00/501).
(9)
Remove electrical power, if it is not necessary (AMM 24-22-00/201).
S 866-036
(10)
Supply electrical power to charge the batery (AMM 24-22-00/201).
S 866-031
S 866-014
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-31-12
ALL ú ú 01 Page 606 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 866-037
(11)
Do the steps for the Charge Mode Test in the Operation Test (AMM 24-31-21/501).
S 866-026
(12)
Remove electrical power, if it is not necessary (AMM 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-31-12
ALL ú ú 01 Page 607 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
BATTERY CHARGER - REMOVAL/INSTALLATION
______________________________________
1. General
_______
A. This procedure contains two tasks for the battery charger.
(1)
The removal of the battery charger.
(2)
The installation of the battery charger.
B.
The battery charger is on the E3-1 rack in the E/E equipment compartment (Fig. 401).
TASK 24-31-21-004-003
2. Battery Charger Removal (Fig. 401)
_______________________
A. References
(1)
AMM 20-10-07/201, E/E Rack-Mounted Components
(2)
AMM 20-40-12/201, Electrostatic Discharge Sensitive Devices
(3)
SSM 24-31-21
B.
Access
(1)
Location Zone
205 Electronic Compartment
(2)
Access Panel
1201L Electronic Equipment Access Door
C.
Prepare for removal
S 864-013
(1)
Open these circuit breakers and install DO-NOT-CLOSE tags:
(a)
C809, BAT CHARGER, P6 PNL
(b)
C842, ALT BAT CHARGER, P6 PNL
(c)
C142, BATTERY CHARGER, J9 BATTERY SHIELD
D.
Procedure
S 014-001
(1)
Get access to the battery charger on the E3-1 rack.
S 024-014
(2)
Before you touch the battery charger, refer to (AMM 20-40-12/201).
(3)
Remove the battery charger (AMM 20-10-07/201).
S 024-002
TASK 24-31-21-404-008
3. Battery Charger Installation (Fig. 401)
____________________________
A. References
(1) AMM 20-10-07/201, E/E Rack-Mounted Components
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-31-21
ALL ú ú 02 Page 401 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
ELECTRONIC COMPARTMENT ACCESS DOOR
Battery Charger Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 電源 ELECTRICAL POWER(148)
