Carpet Riser Panel Installation 518
25-21-321 Figure 401 May 15/78
Page 402
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.
SIDEWALL LINING PANELS (AFT ENTRY AND AFT SERVICE DOORWAYS) -REMOVAL/INSTALLATION
1.
General
A These procedures apply to the sidewall lining attached to the structure around the aft entry and aft service door openings.
2.
Remove Sidewall Lining Panels (Aft Entry and Aft Service Doorways)
A Remove passenger equipment as necessary to gain access to the sidewall lining to be removed.
B. Remove rubber seal installed around door opening (Fig. 401).
C. Remove seal retainer if applicable.
D. Remove lining aft of door by sliding forward.
E. Remove lining around upper part of door opening by sliding it down and inboard.
F. Remove assist handle forward of entry door if installed.
G. Remove quarter-turn fasteners attaching gap-cover to structure forward of door.
H. Remove lining forward of door by sliding aft and inboard.
3. Install Sidewall Lining Panels (Aft Entry and Aft Service Doorways) A Install sidewall linings by sliding lining edges into slot in trim angle (Fig. 401).
B. Install seal retainer if applicable.
C. Install rubber seal around door opening.
D. Install assist handle forward of entry door if applicable.
E. Install quarter-turn fasteners attaching gap-cover to structure forward of door.
F. Install any passenger equipment removed for access to doorway lining panels.
541
Feb 01/74 BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 25-21-325 Page 401
Sidewall Lining Panels Installation (Aft Entry and Service Doorways) 527
25-21-325 Figure 401 Oct 20/86
Page 402
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.
SIDEWALL LINING PANELS (FORWARD ENTRY DOORWAY) - REMOVAL/INSTALLATION
1. General
A. These procedures apply to the sidewall lining attached to the structure around the forward entry door opening.
2. Remove Sidewall Lining Panels (Forward Entry Doorway) (Fig. 401)
A. Remove passenger equipment such as a partition, passenger seat, or galley unit as necessary to gain access to the sidewall lining to be removed.
B. Remove assist handle aft of entry door.
C. Remove hinge cover panels.
D. Remove rubber seal from retainer around door opening.
E. Remove screws that attach trim angle and remove forward and aft side trim angles.
F. Remove forward and aft kickplates.
G. Remove quarter-turn fasteners attaching panels forward of door to sidewall structure.
H. Remove panels forward of door by sliding aft.
I. Remove panel aft of door by pulling forward and inboard to clear windscreen attachment brackets and sliding forward.
3. Install Sidewall Lining Panels (Forward Entry Doorway) (Fig. 401)
A. Install panel aft of door by sliding aft under trim strip.
B. Install panels forward of door by sliding aft into slot on trim strip and secure with quarter-turn fasteners.
C. Install trim angles and seal retainer.
D. Install rubber seal.
E. Install kick plates.
F. Install assist handle.
G. Install hinge cover panels.
H. Install any passenger equipment removed for access to doorway lining panels.
540
Feb 01/74 BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 25-21-331 Page 401
Sidewall Lining Panels Installation (Forward Entry Doorway) 541
25-21-331 Figure 401 Feb 01/74
Page 402
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.
SIDEWALL LINING PANELS (FORWARD GALLEY DOORWAY) - REMOVAL/INSTALLATION
1. General
A. These procedures apply to the sidewall lining attached to the structure around the forward galley door opening.
2. Remove Sidewall Lining Panels (Forward Galley Doorway) (See figure 401.)
A. Remove passenger equipment such as a partition, passenger seat, or galley unit as necessary to gain access to the sidewall lining to be removed.
B. If installed, remove assist handle forward of galley door.
C. Remove rubber seal from retainer around door opening.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS(52)
