曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

C.  Temporarily remove cargo/passenger dividing partition (Ref. 25-24-152).
D.  Remove seat track covers in area desired for cargo accommodation and place in seat back pocket of adjacent seats (Ref. 25-27-100).
E.  Remove seats from area desired for cargo accommodation. Place a numbered card in a seat back pocket of each seat to identify row number for reinstallation.
F.  Remove floor covering from area desired for cargo accommodation (Ref. 25-27-100). Roll carpet segments at each pallet position together into one roll to aid in reinstallation.
G.  Install additional parts of cargo system as necessary (Ref. 25-56-0).
H.  Reinstall cargo/passenger dividing partition (Ref. 25-24-152).
I.  If dividing partition is installed aft of overwing emergency exits, remove exit light located on air conditioning ceiling outlet opposite emergency exits (Ref. Chapter 33, Emergency Lights).
J.  Remove personnel safety net and close main cargo door.
K.  Close gasper air outlets and turn off all reading lights on passenger service units located forward of dividing partition.
L.  Verify that the forward overhead light fixture air outlet shutoff valve is at the closed position.
WARNING:  EMERGENCY PROVISIONS FOR PREVENTING 8MOKE PENETRATION INTO PASSENGER AND CREW COMPARTMENTS REQUIRE THAT THE FORWARD VALVE BE CLOSED IN THE ALL-CARGO AND PASSENGER/CARGO CONFIGURATIONS.
4.  Convert Cabin to Decrease Cargo Accommodation
A.  Open main cargo door (Ref. Chapter 52, Main Cargo Door).
B.  Install personnel safety net across main cargo door opening while door is open. Net should be installed whenever door is not being used for loading or unloading (Fig. 202).
WARNING:  TAKE CARE WHEN WORKING IN VICINITY OF OPEN DOOR. INSTALL DOORWAY SAFETY BARRIER TO PREVENT FALLING THROUGH DOORWAY.
C.  Temporarily remove cargo/passenger dividing partition (Ref. 25-24-152).
D.  Remove aft portion of cargo system as required (Ref. 25-56-0).
538 
25-09-141  Page 204  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  Oct 20/84 

E.  Clean cabin floor as necessary.
F.  Install floor covering in area desired for passenger accommodation (Ref. 25-27-100).
G.  Install passenger seats as required. Arrange seats in accordance with numbered cards placed in seat back pockets during removal. Lock seats to floor tracks installing seat track covers to determine spacing.
H.  Reinstall cargo/passenger dividing partition (Ref. 25-24-152).
I.  If dividing partition is forward of overwing emergency exits, install exit light on air conditioning ceiling outlet opposite emergency exits (Ref. Chapter 33, Emergency Lights).
J.  Remove personnel safety net and close main cargo door.
K.  Verify that the forward overhead light fixture air outlet shutoff valve is at the closed position.
WARNING:  EMERGENCY PROVISIONS FOR PREVENTING SMOKE PENETRATION INTO PASSENGER AND CREW COMPARTMENTS REQUIRE THAT THE FORWARD VALVE BE CLOSED IN THE ALL-CARGO AND PASSENGER/CARGO CONFIGURATIONS.
538 
Oct 20/84  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  25-09-141 Page 205 

CABIN CONVERSION ALL-PASSENGER - MAINTENANCE PRACTICES
EFFECTIVITY
Standard Passenger Airplanes ALL EXCEPT CAC B-2501 thru B-2503
1. General
A.  The passenger cabin equipment can be arranged in alternate all-passenger configurations as follows (Fig. 201):
(1)  
130 Tourist Class Passengers

(2)  
124 Tourist Class Passengers

(3)  
104 Tourist/8 First Class Passengers

2.  Convert Cabin between All-Tourist and Mixed-Class Configurations
A.  Compare cabin configurations in Fig. 201 to determine which equipment requires removal or installation.
B.  Close passenger oxygen cylinder shutoff valves (Ref. 35-21-0).
NOTE:  Maintenance personnel should be familiar with safety procedures contained in 35-00, Maintenance Practices.
C.  Open the following circuit breakers on panel P18:
(1)  
RIGHT READING

(2)  
LEFT READING

(3)  
NO SMOKING

(4) 
 SEAT BELT

(5)  
PASSENGER AND CREW CALL

D.  Remove or install forward windscreen (Ref. 25-24-112 as required).
E.  Remove first-class seats as required.
F.  Remove or install class divider partition (Ref. 25-24-341) as required.
G.  Remove seat track covers from any area of cabin in which seats are to be removed or relocated.
H.  Remove, install, and relocate passenger seats as necessary to provide desired seating arrangement. Conversion between all-tourist and mixed-class configurations will require exchange of some triple tourist seats for double first class seats, or vice versa.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS(37)