TASK 49-00-00-810-871
Visual Oil-Filter Clogging-Indicator popped out (GTCP 36-300)
1. Possible Causes_______________
- GEN-APU (8XS)
- AUXILIARY POWER UNIT (4005KM)
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 24-23-51-000-001 Removal of the APU Generator 8XS
AMM 24-23-51-400-001 Installation of the APU Generator 8XS
AMM 49-00-00-710-004 Operational Test of the APU (4005KM) (GTCP 36-300)
AMM 49-00-00-860-003 APU Start by External Power (GTCP 36-300)
AMM 49-00-00-860-004 APU Shutdown by External Power (GTCP 36-300)
AMM 49-11-00-000-002 Removal of the Generator Substitution Kit (GTCP 36-300)
AMM 49-11-00-400-002 Installation of the Generator Substitution Kit (Flight without Generator) (GTCP 36-300)
AMM 49-11-11-000-001 Removal of the Auxiliary Power Unit (APU) - 4005KM (GTCP 36-300)
AMM 49-11-11-400-001 Installation of the Auxiliary Power Unit (APU) -4005KM (GTCP 36-300)
AMM 49-90-00-600-002 Oil Change (Drain Method) (GTCP 36-300)
AMM 49-91-41-200-001 Remove and discard Alternator Scavenge Filter Element (8069KM) (GTCP 36-300)
AMM 49-91-42-200-001 Check APU Magnetic Chip Detector (MCD) (GTCP 36-300)
AMM 49-91-45-200-002 Remove and discard Lube Filter Element (GTCP 36-300)
3. Fault Confirmation__________________
A. Check/Test
(1) Do the operational test of the APU (Ref. AMM TASK 49-00-00-710-004).
(2) Do a visual check of the differential pressure indicators of the APU generator scavenge filter and the APU lubrication filter.
4. Fault Isolation
_______________
A. If the differential pressure indicator confirms that the APU generator scavenge filter and/or the APU lubrication filter is/are clogged:
- remove the oil filter elements (Ref. AMM TASK 49-91-41-200-001) and (Ref. AMM TASK 49-91-45-200-002),
- do an inspection of the removed oil filter elements (Ref. AMM TASK 49-91-41-200-001) and (Ref. AMM TASK 49-91-45-200-002),
- do an inspection of the magnetic drain plug (Ref. AMM TASK 49-91-42-200-001).
- install the oil filter elements (Ref. AMM TASK 49-91-41-200-001) and (Ref. AMM TASK 49-91-45-200-002),
(1) If the inspections show that the filter elements has caught: .copper wire particles, .nonmetallic flakes, .phenolic resin.
- remove the GEN-APU (8XS) (Ref. AMM TASK 24-23-51-000-001) and install a generator cover plate (Ref. AMM TASK 49-11-00-400-002),
- change the APU oil (Ref. AMM TASK 49-90-00-600-002),
- start and operate the APU for 15 minutes (Ref. AMM TASK 49-00-00-860-003),
- shutdown the APU (Ref. AMM TASK 49-00-00-860-004),
- remove the oil filter elements (Ref. AMM TASK 49-91-41-200-001) and (Ref. AMM TASK 49-91-45-200-002),
- do an inspection of the removed oil filter elements (Ref. AMM TASK 49-91-41-200-001) and (Ref. AMM TASK 49-91-45-200-002),
- do an inspection of the magnetic drain plug (Ref. AMM TASK 49-91-42-200-001).
(a) If you do not find contamination after 15 min. APU operation:
- remove the generator cover plate (Ref. AMM TASK 49-11-00-000-002),
- install a new GEN-APU (8XS) (Ref. AMM TASK 24-23-51-400-001)
- install the serviceable oil filter elements (Ref. AMM TASK 49-91-41-200-001) and (Ref. AMM TASK 49-91-45-200-002),
(b) If you find contamination after 15 min. APU operation:
- install the oil filter elements (Ref. AMM TASK 49-91-41-200-001) and (Ref. AMM TASK 49-91-45-200-002),
- replace the AUXILIARY POWER UNIT (4005KM) (Ref. AMM TASK 49-11-11-000-001) and (Ref. AMM TASK 49-11-11-400-001),
(c) If the inspections show that the filter elements has caught brass or silver-plated steel particles:
- replace the AUXILIARY POWER UNIT (4005KM) (Ref. AMM TASK 49-11-11-000-001) and (Ref. AMM TASK 49-11-11-400-001).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-003, 051-099, 401-499, ∞∞49-00-00∞∞∞∞∞∞∞∞∞∞Page B230
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 1(83)
