TASK 49-00-00-810-825
APU AUTO SHUT DOWN - Slow Start Shutdown, Oil Sump Temperature Fault (GTCP
36-300)
1. Possible Causes
_______________
- OIL SUMP TEMPERATURE-SENSOR P25
- wiring
- ECB (59KD)
- OIL SUMP TEMPERATURE-SENSOR (8084KM)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 49-00-00-710-001 Self-Test of the ECB (59KD) (GTCP 36-300) AMM 49-61-34-000-001 Removal of the Electronic Control Box (ECB) (59KD) (GTCP 36-300) AMM 49-61-34-400-001 Installation of the Electronic Control Box (ECB) (59KD) (GTCP 36-300) AMM 49-91-51-000-001 Removal of the Oil Sump Temperature-Sensor (8084KM) (GTCP 36-300) AMM 49-91-51-400-001 Installation of the Oil Sump Temperature-Sensor (8084KM) (GTCP 36-300) ASM 49-61/02
3. Fault Confirmation
__________________
A. Do the Self Test of the ECB (Ref. AMM TASK 49-00-00-710-001).
4. Fault Isolation
_______________
**ON A/C 001-003, 051-062,
A. If the test gives the maintenance message:
OIL SUMP TEMP SNSR P25
and the previous APU SWHUTDOWNS report gives the maintenance message:
START TIME EXCEEDED - OIL SUMP TEMP SNSR P25
or
NO ACCELERATION - OIL SUMP TEMP SNSR P25
- replace the OIL SUMP TEMPERATURE-SENSOR P25 (Ref. AMM TASK 49-91-51-000-001) and (Ref. AMM TASK 49-91-51-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the ECB (59KD) AB/C2, D2 to the OIL SUMP TEMPERATURE SENSOR P25/1, 2 (Ref. ASM 49-61/02).
(2) If the fault continues:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-001) and (Ref. AMM TASK 49-61-34-400-001).
R **ON A/C 063-099, 401-499,
A. If the test gives the maintenance message:
OIL SUMP TEMP SENSOR (8084KM)
with LRU TROUBLE SHOOTING DATA menu information
OIL SUMP TEMP SENSOR SHOWS OUT OF RANGE HIGH
Fault Code Number: 055
and the previous APU SHUTDOWNS report gives the maintenance message:
NO ACCELERATION - OIL SUMP TEMP SENSOR (8084KM)
- replace the OIL SUMP TEMPERATURE-SENSOR (8084KM) (Ref. AMM TASK 49-91-51-000-001) and (Ref. AMM TASK 49-91-51-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the ECB (59KD) AB/C2, D2 to the OIL SUMP TEMPERATURE SENSOR (8084KM) P25/1, 2 (Ref. ASM 49-61/02).
(2) If the fault continues:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-001) and (Ref. AMM TASK 49-61-34-400-001).
R **ON A/C 001-003, 051-099, 401-499,
B. Do the test as given in the Para. 3.
TASK 49-00-00-810-826
APU AUTO SHUT DOWN - Slow Start Shutdown, De-Oiling Solenoid Fault (GTCP
36-300)
1. Possible Causes
_______________
- DE-OILING SOLENOID VALVE P15
- wiring
- ECB (59KD)
- DE-OILING SOLENOID VALVE (8083KM)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 49-00-00-710-001 Self-Test of the ECB (59KD) (GTCP 36-300) AMM 49-61-34-000-001 Removal of the Electronic Control Box (ECB) (59KD) (GTCP 36-300) AMM 49-61-34-400-001 Installation of the Electronic Control Box (ECB) (59KD) (GTCP 36-300) AMM 49-91-49-000-001 Removal of the De-Oiling Solenoid Valve (8083KM) (GTCP 36-300) AMM 49-91-49-400-001 Installation of the De-Oiling Solenoid Valve (8083KM) (GTCP 36-300) ASM 49-61/02
3. Fault Confirmation
__________________
A. Do the Self Test of the ECB (Ref. AMM TASK 49-00-00-710-001).
4. Fault Isolation
_______________
**ON A/C 001-003, 051-062,
A. If the test gives the maintenance message:
DE-OILING SOL P15:
and the previous APU SHUTDOWNS report gives the maintenance message
START TIME EXCEEDED - DE-OILING SOL P15
or
NO ACCELERATION - DE-OILING SOL P15
- replace the DE-OILING SOLENOID VALVE P15 (Ref. AMM TASK 49-91-49-000-001) and (Ref. AMM TASK 49-91-49-400-001). 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 1(28)
