1_ If the fault continues:
 - replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-002) and
 (Ref. AMM TASK 49-61-34-400-002).

 (2) If the APU Last Leg Report gives the maintenance message:
 INLET T-P SNSR (8013KM): Fault Code Number: 008 or 009
 - replace the INLET T-P SENSOR (8013KM) (Ref. AMM TASK 49-23-17-000-001) and (Ref. AMM TASK 49-23-17-400-001).
 (a) If the fault continues:
 - do a check and repair the wiring (Temperature Side of the Sensor) from the ECB (59KD) D3, E6 to the INLET T-P SENSOR P22/ 6, 5 (Ref. ASM 49-61/02).
 1 If the fault continues:
_

 - replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-002) and (Ref. AMM TASK 49-61-34-400-002).
 B. Do the test given in para. 3.

 TASK 49-00-00-810-909

 Fuel Supply Fault (APS 3200)
 1. Possible Causes_______________
 - APU fuel pump-system

 - air is in the APU fuel line

 - APU FUEL LP-SWITCH (5030QM)

 - wiring

 - ECB (59KD)

 - APU fuel low pressure

 2. Job Set-up Information______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
28-22-00-810-801  APU Fuel System - Low Pressure
 AMM 28-22-00-710-001  Operational Test of the APU Fuel-Pump System on Ground to Purge the Fuel Line
 AMM 28-22-14-000-001  Removal of the APU Fuel LP-Switch 5030QM
 AMM 28-22-14-400-001  Installation of the APU Fuel LP-Switch 5030QM
 AMM 49-00-00-710-008  Operational Test of the APU (APS 3200)
 AMM 49-31-00-710-002  Operational Test of the APU Fuel Low Pressure Circuit (APS 3200)
 AMM 49-61-34-000-002  Removal of the Electronic Control Box (ECB) (59KD) (APS 3200)
 AMM 49-61-34-400-002  Installation of the Electronic Control Box (ECB) (59KD) (APS 3200)
 ASM 49-61/02
 3. Fault Confirmation__________________
 A. Test
 (1) Do the operational test of the APU fuel low pressure warning (Ref. AMM TASK 49-31-00-710-002).

 (2) Do the operational test of the APU (Ref. AMM TASK 49-00-00-710-008).

 4. Fault Isolation
_______________

 A. If the APU Last Leg Report gives the maintenance message:
 FUEL LOW PRESS / LOW FUEL PRESS SW (5030QM): Fault Code Number: 112
 - do the operational test of the APU fuel pump-system (Ref. AMM TASK 28-22-00-710-001) and make sure that no air is in the APU fuel line.
 (1) If the fault continues:
 - replace the APU FUEL LP-SWITCH (5030QM) (Ref. AMM TASK 28-22-14-000-001) and (Ref. AMM TASK 28-22-14-400-001).
 (a) If the fault continues:
 - do a check and repair the wiring from the ECB 59KD AB/B7, B8 to the APU FUEL LP-SWITCH (5030QM) P17/1, 2 (Ref. ASM 49-61/02).
 1_ If the fault continues:
 - replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-002) and
 (Ref. AMM TASK 49-61-34-400-002).

 B. If the operational test of the APU fuel low pressure warning gives that the FUEL LO PR advisory is abnormally on:
 - do the trouble shooting of the APU fuel low pressure (Ref. TASK 28-22-00-810-801).
 C. Do the test given in para. 3.

 TASK 49-00-00-810-910

 Air-Intake Flap-Actuator Fault (APS 3200)
 1. Possible Causes
_______________
 - wiring

 - AIR INTAKE FLAP-ACTUATOR (4015KM)

 - ECB (59KD)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 49-16-00-210-002 Detailed Inspection of APU Air Intake, Diffuser Elbow, Seals and Felt Metal (APS 3200) AMM 49-16-00-710-002 Operational Test of the Air Intake Flap and Diverter (APS 3200) AMM 49-16-51-000-002 Removal of the Air-Intake Flap Actuator (4015KM) (APS 3200) AMM 49-16-51-400-002 Installation of the Air-Intake Flap Actuator (4015KM) (APS 3200) AMM 49-61-34-000-002 Removal of the Electronic Control Box (ECB) (59KD) (APS 3200) AMM 49-61-34-400-002 Installation of the Electronic Control Box (ECB) (59KD) (APS 3200) ASM 49-16/01
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 1(106)