NOTE : The APU SHUTDOWNS report gives the maintenance message:
____ NO ACCELERATION - FUEL CTL UNIT (8022KM) APU Auto Shut Down Fault Code Number: 052 or 053
- do a check and repair the wiring from the ECB (59KD) AB/F11, H10, H11, J3 to the FUEL CONTROL UNIT (8022KM) P19/1, 3, 4, 2 (Ref. ASM 49-61/02).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-106, 108-149, 211-299, 301-399, ∞∞49-00-00∞∞∞∞∞∞∞∞∞∞Page A250
Config-2 Aug 01/05 CES (1) If the fault continues:
- replace the FUEL CONTROL UNIT (8022KM) (Ref. AMM TASK 49-32-11-000-002) and (Ref. AMM TASK 49-32-11-400-002).
(a) If the fault continues:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-002) and (Ref. AMM TASK 49-61-34-400-002).
B. Do the test given in para. 3.
TASK 49-00-00-810-979
APU - High Oil Consumption (APS 3200)
1. Possible Causes
_______________
- oil leaks on oil system components and oil lines
- AUXILIARY POWER UNIT (4005KM)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 49-00-00-790-002 Leak Test of the APU (APS 3200)
AMM 49-11-11-000-003 Removal of the Power Plant (APU) (APS 3200)
AMM 49-90-00-600-004 Check Oil Level and Replenish (APS 3200)
49-00-00-991-003 Fig. 201
3. Fault Confirmation
__________________
A. Do a visual check on the oil sight glass on the accessory drive gearbox:
- do the oil servicing (Ref. AMM TASK 49-90-00-600-004).
- calculate the APU oil consumption.
4. Fault Isolation
_______________
(Ref. Fig. 201/TASK 49-00-00-991-003)
A. If the APU oil consumption is higher than the GRAPH A on Fig. 001:
- examine the APU externally for oil leaks on oil system components and oil lines (Ref. AMM TASK 49-00-00-790-002).
(1) If you find external oil leaks:
- correct/replace as necessary.
(2) If you do not find external oil leaks:
- examine the APU for internal oil leakage (Ref. AMM TASK 49-00-00-790-002).
(a) If the fault continues:
- replace the AUXILIARY POWER UNIT (4005KM) (Ref. AMM TASK 49-11-11-000-003) and (Ref. AMM TASK 49-11-11-000-003).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-106, 108-149, 211-299, 301-399, ∞∞49-00-00∞∞∞∞∞∞∞∞∞∞Page A252
Config-2 Aug 01/05 CES
Guideline for the Oil Consumption of APU APS 3200 in Service
Figure 201/TASK 49-00-00-991-003
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-106, 108-149, 211-299, 301-399, ∞∞49-00-00∞∞∞∞∞∞∞∞∞∞Page A253
Config-2 Aug 01/05 CES
TASK 49-00-00-810-980
Fuel Control Unit Fault (APS 3200)
1. Possible Causes
_______________
- FUEL CONTROL UNIT connector P19
- wiring
- FUEL CONTROL UNIT (8022KM)
- ECB (59KD)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 49-00-00-710-008 Operational Test of the APU (APS 3200)
AMM 49-32-11-000-002 Removal of the Fuel Control Unit (8022KM) (APS 3200)
AMM 49-32-11-400-002 Installation of the Fuel Control Unit (8022KM) (APS
3200) AMM 49-61-34-000-002 Removal of the Electronic Control Box (ECB) (59KD) (APS 3200) AMM 49-61-34-400-002 Installation of the Electronic Control Box (ECB) (59KD) (APS 3200) ASM 49-61/02
3. Fault Confirmation
__________________
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 1(133)
