曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 Control System (ECS) AMM 21-00-00-615-001 Decontamination of the Environmental Control System (ECS) when the Temperature is below 24 deg.C (APU) AMM 21-00-00-615-002 Decontamination of the Environmental Control System
 (ECS) when the Temperature is above 24 deg.C (APU) AMM 24-23-51-000-001 Removal of the APU Generator 8XS AMM 24-23-51-400-001 Installation of the APU Generator 8XS AMM 49-00-00-710-004 Operational Test of the APU (4005KM) (GTCP 36-300) AMM 49-11-11-000-001 Removal of the Auxiliary Power Unit (APU) - 4005KM
 (GTCP 36-300) AMM 49-11-11-400-001 Installation of the Auxiliary Power Unit (APU) -
4005KM (GTCP 36-300) AMM 49-16-00-100-001 Cleaning of the APU Air Intake System (GTCP 36-300) AMM 49-16-00-210-001 Detailed Inspection of the Air Intake, Diffuser
 Elbow, Seals and Felt Metal (GTCP 36-300) AMM 49-20-00-100-001 APU Compressor Cleaning (GTCP 36-300) AMM 49-20-00-200-001 Inspection/Check of the Engine (4005KM) (GTCP 36-300) AMM 49-23-51-000-002 Removal of the Inlet Guide Vane-Actuator (8014KM)
 (GTCP 36-300)

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-003, 051-099, 401-499, ∞∞49-00-00∞∞∞∞∞∞∞∞∞∞Page A227
 Config-1 Aug 01/05 CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

 

AMM  49-23-51-400-002 
AMM  49-26-53-000-001 
AMM  49-26-53-400-001 
AMM  49-32-11-000-001 
AMM  49-32-11-400-001 
AMM  49-51-51-000-001 
AMM  49-51-51-400-001 
AMM  49-52-51-000-001 
AMM  49-52-51-400-001 
AMM  49-90-00-600-001 
AMM  49-91-41-200-001 
AMM  49-91-42-200-001 
AMM  49-91-42-400-001 
AMM  49-91-44-000-001 
AMM  49-91-44-000-002 
AMM  49-91-44-400-001 
AMM  49-91-44-400-002 
AMM  49-91-45-000-001 
AMM  49-91-45-200-002 
AMM  49-91-45-400-001 
AMM  49-91-49-000-001 
AMM  49-91-49-400-001 
AMM  49-91-53-000-001 
AMM  49-91-53-400-001 
AMM  49-93-16-000-001 
AMM  49-93-16-400-001 
AMM  49-94-00-000-003 
AMM  49-94-00-400-001 

Installation of the Inlet Guide Vane-Actuator
 (8014KM) (GTCP 36-300)
Removal of the Regulating Gearbox Valve (8016KM)
 (GTCP 36-300)
Installation of the Regulating Gearbox Valve (8016KM)
 (GTCP 36-300)
Removal of the Fuel Control Unit (FCU) (8022KM) (GTCP
 36-300)
Installation of the Fuel Control Unit (FCU) (8022KM)
 (GTCP 36-300)
Removal of the Bleed Load Control-Valve (8050KM)
 (GTCP 36-300)
Installation of the Bleed Load Control-Valve (8050KM)
 (GTCP 36-300)
Removal of the Fan Assembly (8053KM) (GTCP 36-300)
Installation of the Fan Assembly (8053KM) (GTCP
 36-300)
Check Oil Level and Replenish (GTCP 36-300)
Remove and discard Alternator Scavenge Filter Element
 (8069KM) (GTCP 36-300)
Check APU Magnetic Chip Detector (MCD) (GTCP 36-300)
Installation of the Drain Plug (8077KM) (GTCP 36-300)
Removal of the Oil Cooler (8079KM) (GTCP 36-300)
Removal of the Thermal By-Pass Valve (GTCP 36-300)
Installation of the Oil Cooler (8079KM) (GTCP 36-300)
Installation of the Thermal By-Pass Valve (GTCP
 36-300)
Removal of the Oil Pump (8080KM) (GTCP 36-300)
Remove and discard Lube Filter Element (GTCP 36-300)
Installation of the Oil Pump (8080KM) (GTCP 36-300)
Removal of the De-Oiling Solenoid Valve (8083KM)
 (GTCP 36-300)
Installation of the De-Oiling Solenoid Valve (8083KM)
 (GTCP 36-300)
Removal of turbine bearing cavity vent and
 lubrication tube packing (GTCP 36-300)
Installation of turbine bearing cavity vent and
 lubrication tube packing (GTCP 36-300)
Removal of the Oil Level Switch (8087KM) (GTCP
 36-300)
Installation of the Oil Level Switch (8087KM) (GTCP
 36-300)
Removal of the Oil Pressure/Temperature Assembly
 (GTCP 36-300)
Installation of the Oil Pressure/Temperature Assembly
 (GTCP 36-300)

 

 3. Fault Confirmation
__________________
 A. If it is necessary to confirm the fault:
 - do the pre-conditioning with the APU (Ref. AMM TASK 12-33-21-618-001) and

 - do a check in the cabin for fumes.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 1(43)