-
there are no scratches or scores
-
there are no loose or damaged fasteners
-the surface protection is in the correct condition.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 572100) for the
____
correct repair procedure.
5. Close-up
________
Subtask 57-20-00-410-060
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the HOOK-COVER (RIB 2 SURGE DOORS) from the forward surge doors.
(3)
Remove the HOOK-COVER (RIB2-SURGE DOORS) from the aft surge doors.
(4)
Close the RIB2 surge doors:
-
for the left wing, close 540AZ, 540BZ
-
for the right wing, close 640AZ, 640BZ.
(5)
Install the applicable access panels:
-
for the left wing, install 540AB, 540BB, 540CZ, 540DZ
-
for the right wing, install 640AB, 640BB, 640CZ, 640DZ, (Ref. TASK 57-27-11-400-001), (Ref. TASK 57-27-11-400-003) and (Ref. TASK 57-27-11-400-007).
(6)
Remove the TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER from the flap/slat control lever.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-20-00Page 665 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Subtask 57-20-00-942-060
B. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-20-00Page 666 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
**ON A/C 301-399,
TASK 57-20-00-200-010- 01
Detailed Inspection of Outer Wing, Top Skin Stringers, Between RIB 1 and RIB 8, including Runouts and Air Transfer Holes, and Butt Strap, at Stringer 11
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Refer to the MPD TASK: 572020-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers
No specific warning notices
No specific access platform 2 m (6 ft. 7 in.)
98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER
98D57004013000 2 HOOK-COVER (RIB 2 SURGE DOORS)
98D57004014000 2 HOOK-COVER (RIB2-SURGE DOORS)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00) Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R 1EFF : 301-399, 1 57-20-00Page 667 1 1 Aug 01/05 1 1 1CES 1 C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-00-00-910-001 Fuel Safety Procedures
28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank
57-27-11-000-001 Removal of the Access Panel (540AB, 540BB, 540CB,
540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB,
640DB, 640EB, 640FB, 640GB)
57-27-11-000-007 Removal of the Closing Panel
540CZ(640CZ),540DZ(640DZ)
57-27-11-400-001 Installation of the Access Panel (540AB, 540BB,
540CB, 540DB, 540EB, 540FB, 540GB, 640AB, 640BB,
640CB, 640DB, 640EB, 640FB, 640GB)
57-27-11-400-007 Installation of the Closing Panel 540CZ(640CZ),
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼1(85)
