5. Close-up
________ Subtask 57-21-00-410-054
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the applicable access panels:

 -
for the left wing, 522AB, 522CB, 522EB, 522FB, 522HB, 522JB, 522KB, 522LB, 522NB, 522QB

 -
for the right wing, 622AB, 622CB, 622EB, 622FB, 622HB, 622JB, 622KB, 622LB, 622NB, 622QB.

 Subtask 57-21-00-865-061
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CV, 7CV.
 Subtask 57-21-00-866-058
 C. Aircraft Configuration WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
_______ CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
 (1) Remove the slat/flap control lever locking tool (Ref. TASK 27-00-00-080-002).
 (2) Retract the slats (Ref. TASK 27-80-00-866-005). Subtask 57-21-00-942-055
 D. Removal of Equipment
 (1)
 Remove the warning notice(s).

 (2)
 Remove the safety barriers.

 (3)
 Remove the access platform(s).

 1EFF : ALL 1 57-21-00Page 635 1 1 Nov 01/04R 1 1 1CES 1

 (4) Remove the ground support and maintenance equipment, the special and

 standard tools and all other items.

 1EFF : ALL 1 57-21-00Page 636 1 1 Nov 01/04R 1 1 1CES 1

 TASK 57-21-00-200-007 
R R  Detailed Inspection of Outer Wing, Front Spar Forward Face, between RIB22 and RIB27, including all Cutouts
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR.
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE.
 1. Reason for the Job__________________
 Refer to the MPD TASK: 572106-01
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific No specific No specific No specific  circuit breaker(s) safety clip(s)safety barrierswarning noticesadjustable access platform 2 m (6 ft. 7 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R  Material No. 11-026 Material No. 19-003  GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-00-00-480-002 Installation of the Flap/Slat Control-Lever Locking
 Tool (98D27803000000) 27-80-00-866-004 Extending the Slats on the Ground 27-80-00-866-005 Retracting the Slats on the Ground ASRM 572100 (for corrective action) 57-21-00-991-009 Fig. 607
 3. Job Set-up
__________ Subtask 57-21-00-941-057
 A. Safety Precautions
 (1) Put warning notices in the cockpit to tell persons not to move the slats or flaps.
 (2) Put the safety barriers in position. Subtask 57-21-00-860-051
 B. Aircraft Maintenance Configuration
 (1)
 Fully extend the slats (Ref. TASK 27-80-00-866-004).

 (2)
 Install the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) on the slat/flap control lever (Ref. TASK 27-00-00-480-002).

 Subtask 57-21-00-865-062
 C. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/SLT/CTL AND MONG/SYS1 5CV B06 121VU FLIGHT CONTROLS/SLT/CTL/SYS2 7CV R21
 1EFF : ALL 1 57-21-00Page 638 1 1 Nov 01/04R 1 1 1CES 1

 Subtask 57-21-00-010-055

 D. Get Access
 (1)
 Put the adjustable access platform in position below the wing leading edge, zone 522 (622).

 (2)
 Remove the applicable access panels:

 -
for the left wing, remove 522QB, 522SB, 522UB

 -
for the right wing, remove 622QB, 622SB, 622UB.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼1(124)