(a)
Tests pass:
-if VOR selected on FCU
-ND
VOR 1 or 2 in white
(b)
Tests failed:
-if VOR selected on FCU
-ND
VOR 1 or 2 in red
VOR 1 or 2 bearing in red
1EFF : ALL 1 34-55-00Page 57 1 1 May 01/05R 1 1 1CES 1
VOR/MARKER - ADJUSTMENT/TEST
____________________________
TASK 34-55-00-740-002
BITE Test of the VOR/MKR
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-010 Procedure to Get Access to the SYSTEM REPORT/TEST NAV
Page
34-10-00-860-002 ADIRS Start Procedure
34-10-00-860-004 IR Alignment Procedure
34-10-00-860-005 ADIRS Stop Procedure
34-55-00-991-001 Fig. 501
3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-105, 151-199,
Subtask 34-55-00-860-054-B
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the ADIRS Start procedure (Ref. TASK 34-10-00-860-002)
(3)
Do the IR alignment procedure (Ref. TASK 34-10-00-860-004)
1EFF : ALL 1 34-55-00Page 501 1 1 May 01/05 1 1 1CES 1
(4)
On the EFIS control sections of the FCU:
-
set the ADF/VOR selector switches to VOR
-
set the mode selector switches to ROSE/VOR.
-push the ILS pushbutton switches.
(5)
On the center pedestral, on one MCDU:
-get the SYSTEM REPORT/TEST/NAV page (Ref. TASK 31-32-00-860-010).
-push the NEXT PAGE function key.
(6)
On the center pedestal, on the RMP1 (RMP2):
-set the ON/OFF switch to ON
-push the NAV and VOR pushbutton switches (the green LED on these pushbutton switches comes on)
-set the non local VOR1 and VOR2 stations and a course of 190.. (Ref. Fig. 501/TASK 34-55-00-991-001)
R **ON A/C 106-149, 201-299, 301-399, 401-499,
Subtask 34-55-00-860-054-C
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
(3)
Do the IR alignment procedure (Ref. TASK 34-10-00-860-004).
(4)
On the EFIS control sections of the FCU :
-
set the ADF/VOR selector switches to VOR
-
set the mode selector switches to ROSE/VOR.
-push the ILS pushbutton switches.
(5)
On the center pedestal, on one MCDU:
-get the SYSTEM REPORT/TEST/NAV page (Ref. TASK 31-32-00-860-010)
-push the NEXT PAGE function key.
(6)
On the center pedestal, on the RMP1 (RMP2):
-set the ON/OFF switch to ON
-push the NAV and VOR pushbutton switches (the green LED on these pushbutton switches comes on)
-set the non local VOR1 and VOR2 stations and a course of 190. (Ref. Fig. 501/TASK 34-55-00-991-001)
1EFF : ALL 1 34-55-00Page 502 1 1 Aug 01/05 1 1 1CES 1
VOR-Frequency and Course Selection
Figure 501/TASK 34-55-00-991-001
1EFF : ALL 1 34-55-00 Page 503
1 1 Feb 01/98
1 1
1CES 1
(7) On the VOR/ADF/DME RMI :
-set the VOR/ADF selector switches to VOR.
**ON A/C ALL
Subtask 34-55-00-865-054
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV/VOR/DME/RMI 12FN F13 49VU NAV/VOR/1 2RS1 G13 121VU COM NAV/VOR/2 2RS2 K08
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM NAVIGATION 導(dǎo)航4(170)
