(2)
On one MCDU, get the SYSTEM REPORT/TEST INST menu page item. (Ref. TASK 31-32-00-860-008)
R 1EFF : ALL 1 31-50-00Page 534 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-50-00-865-059
B. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------
PANEL ------ DESIGNATION --------------------------------------------------------- IDENT. LOCATION----------------
49VU SDAC/1/SPLY 3WV F04
49VU SDAC/2/26VAC SYNC/AC ESS BUS 6WV F03
49VU SDAC/1/26VAC SYNC/AC ESS BUS 5WV F02
49VU FWS/FWC1/SPLY 3WW F01
121VU EIS/FWC2/SPLY 2WW Q07
121VU EIS/SDAC/2/SPLY 2WV Q06
121VU EIS/SDAC/1/BUS2/26VAC SYNC AC 7WV Q03
121VU EIS/SDAC/2/BUS2/26VAC SYNC AC 8WV Q02
4. Procedure_________
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-228, 301-302,
Subtask 31-50-00-740-051
A. Test
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On one MCDU, on the INST menu page:
1.
Push the line key adjacent to the ECAM 1 indication.
2.
Push the NEXT PAGE key.
3.
Push the line key adjacent to the SYSTEM CONFIGURATION indication.
4.
Push the line key adjacent to the ECAM PIN PROGRAM indication.
5.
Push the NEXT PAGE key.
The menu of the ECAM 1 page comes intoview after a few seconds.
The ECAM 1 FWC 1/2-SDAC1/2-ECP page comes into view.
The ECAM 1 SYSTEM CONFIGURATION pagecomes into view.
The ECAM 1 ECAM PIN PROGRAM page comesinto view with indications SDAC1 and SDAC2 pin program.
The ECAM 1 ECAM PIN PROGRAM page comes into view with indications FWC1 and FWC2 pin program.
R 1EFF : ALL 1 31-50-00Page 535 1 1 Aug 01/05 1 1 1CES 1
R **ON A/C 106-149, 229-299, 303-399, 401-499,
Subtask 31-50-00-740-051-A
A. Test
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
On the MCDU, push the line key adjacent to the ECAM 1 indication.
2.
Push the next page key.
3.
Push the line key adjacent to the SYSTEM CONFIGURATION indication.
4.
Push the line key adjacent to the ECAM PIN PROGRAM HARD indication.
5.
Push the next page key.
**ON A/C ALL
5. Close-up
________
Subtask 31-50-00-860-062On the MCDU, theECAM-1/FWC1/2-SDAC1/2-ECP page comesinto view.
The ECAM-1/FWC1/2-SDAC1/2-ECP next page comes into view.
The ECAM-1/SYSTEM CONFIGURATION pagecomes into view.
The ECAM-1/ECAM PIN PROGRAM HARD pagecomes into view with SDAC1 and SDAC2 parity.
The ECAM-1/ECAM PIN PROGRAM HARD next page comes into view with FWC1 and FWC2 parity.
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS MENU page comes into view.
(2)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002)
(3)
Put the system back to the serviceable condition.
(4)
Put the aircraft back to the serviceable condition.
R 1EFF : ALL 1 31-50-00Page 536 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 229-299, 303-399, 401-499,
TASK 31-50-00-740-003
Read SDAC and FWC Software Pin Programming
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-008 Procedure to Get Access to the SYSTEM REPORT/TEST/INST Page
3. Job Set-up
__________
Subtask 31-50-00-860-089
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 5(164)
