NOTE : When there are several valid trigger conditions, the minor
____ triggered code has priority and is the only one printed on the report thus:
 -The values of the report lines CE, E1, S3 and S2/T2 have to be crosschecked with the AMM 05-51-11.
 The list that follows shows the trigger codes and the event that causes the print-out of the load report during a hard/overweight landing:
 -4100: Excessive Radio Altitude Rate (RALR)
 -4400: Excessive Body Normal Acceleration (VRTA) (compared to the limit at landing) - during +/- 0.5 seconds before and after landing
 -4500: Excessive Body Normal Acceleration (VRTA) (compared to the limit at landing with bounce) - during +/- 0.5 seconds at landing (VRTA > VRTAL1.2) or at bounce (VRTA > VRTAL1.3)
 -4800: Excessive Gross Weight (GW) (compared to Radio Altitude Rate (RALR) - at dataset time at landing
 -4900: Excessive Gross Weight (GW) - compared to Body Normal Acceleration (VRTA) - during +/- 0.5 seconds before and after landing.
 (2)
 For additional information refer to (Ref. TASK 05-51-11-200-004) and to the description of the load reports (Ref. AMM 31-37-51 P.Block 001).

 (3)
 If you are not sure that the load report values are correct do a download of the DFDR data (Ref. TASK 31-33-00-710-009) and a DFDR data analysis to confirm the values.

 Subtask 31-37-00-210-051
 B. Check of the Load Report Parameter after Excessive Turbulence
 (1) Do a check of the report lines CE, E1, S2/T2, EC and EE.
 **ON A/C 201-202,
 (Ref. Fig. 201/TASK 31-37-00-991-001)

R **ON A/C 001-049, 051-099, 101-149, 151-199, 203-299, 301-399, 401-499,
 Post SB 31-1111 For A/C 001-003,
 Post SB 31-1122 For A/C 051-054,

 (Ref. Fig. 201A/TASK 31-37-00-991-001-A)
 **ON A/C 201-202,
 (Ref. Fig. 202/TASK 31-37-00-991-002)
 1EFF : ALL 1 31-37-00Page 209 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 203-299, 301-399, 401-499,

 Post SB 31-1111 For A/C 001-003,
 Post SB 31-1122 For A/C 051-054,
 (Ref. Fig. 202A/TASK 31-37-00-991-002-A)
 **ON A/C ALL
 Post SB 31-1111 For A/C 001-003,
 Post SB 31-1122 For A/C 051-054,
 NOTE : When there are several valid trigger conditions, the minor
____ triggered code has priority and is the only one printed on the report thus:
 -The values of the report lines CE, E1 and S2/T2 have to be crosschecked with the AMM 05-51-17.
 The list that follows shows the trigger codes and the event that causes the print-out of the load report after excessive turbulence:
 -5100: Excessive Body Normal Acceleration (VRTA) - compared to the positive limit, flap in clean configration
 -5200: Excessive Body Normal Acceleration (VRTA) - compared to the negative limit, flap in clean configuration
 -5300: Excessive Body Normal Acceleration (VTRA) - compared to the positive or negative limit with extended flaps.
 (2)
 For additional information refer to (Ref. TASK 05-51-17-200-001) and to the description of the load reports (Ref. AMM 31-37-51 P.Block 001).

 (3)
 If you are not sure that the load report parameters are correct do a download of the DFDR data (Ref. TASK 31-33-00-710-009) and a DFDR data analysis to confirm the parameters.

 Subtask 31-37-00-800-050
 C. Complementary Information
 The list that follows shows the trigger codes, the parameter and their standard values:
 -5100, 5200, 5300: FLAP (FLAP position: from 0.00 to 40.00 deg.)
 -
4800, 4900: GW (gross weight: from 0 to 8000 multiply by 10 kg)

 -
4800, 4900: GWL (standard value at 73500 kg)

 -4100, 4800: RALR (radio altitude rate (vertical Speed): from -99.9 to
 99.9 ft/sec. - negative value indicated by 'N' on the first digit)
 -4100: RALRL (standard value at -9 ft/sec.)
 -4800: RALRLG (standard value at -6 ft/sec.)
 1EFF : ALL 1 31-37-00Page 210 1 1 Aug 01/05 1 1 1CES 1

 -4400, 4500, 5100, 5200, 5300: VRTA (normal acceleration: from -3.00 to
 6.00 g - negative value indicated by 'N' on the first digit)
 -4900: VRTALG (standard value at 1.7 g)
 -4400: VRTAL1.1 (standard value at 2.6 g)
 -
4500: VRTAL1.2 (standard value at 2.6 g)

 -
4500: VRTAL1.3 (standard value at 2.6 g)

 -5100: VRTAL2.1 (standard value at 2.5 g)
 -5200: VRTAL2.2 (standard value at -1.0 g)
 -5300: VRTAL2.3 (standard value at 2.0 g)
 -5400: VRTAL2.4 (standard value at 0.0 g).
 1EFF : ALL 1 31-37-00Page 211 1 1 May 01/04 1 1 1CES 1
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM 指示/記錄系統(tǒng) 4(107)