**ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
31-33-00-991-001 Fig. 501
R **ON A/C 106-149, 211-299, 301-399, 401-499,
31-33-00-991-001-A Fig. 501A
1EFF : ALL 1 31-33-00Page 501 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
3. Job Set-up
__________
Subtask 31-33-00-861-050
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001).
(3)
Energize the CFDS (Ref. TASK 31-32-00-860-008).
Subtask 31-33-00-865-050
B.
Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU COM/CVR/CTL 4RK E13
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
121VU FDIU & QAR 8TU K17 **ON A/C ALL
121VU RCDR/ACCLRM 9TU K18
121VU RCDR/DFDR 7TU K16
R **ON A/C 106-149, 211-299, 301-399, 401-499,
121VU AIDS & RCDR/QAR 14TU K17 121VU AIDS & RCDR/FDIMU 5TV K15
1EFF : ALL 1 31-33-00Page 502 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
4. Procedure
_________
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
(Ref. Fig. 501/TASK 31-33-00-991-001) R **ON A/C 106-149, 211-299, 301-399, 401-499,
(Ref. Fig. 501A/TASK 31-33-00-991-001-A)
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
Subtask 31-33-00-710-050
A. Do the power interlocks and system monitoring test.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the control panel 21VU: On the control panel 21VU:
- with the engines stopped press - blue light comes on.
GND/CTL button.
2. On the MCDU 3 CA1: On the MCDU screen 3CA1:
- set the MCDU menu. - the MCDU menu comes on.
- set the CFDS menu on the MCDU - the CFDS menu comes on.
menu.
- set the SYSTEM REPORT/TEST menu - the SYSTEM REPORT/TEST comes on.
on the CFDS menu.
- set the INST menu on the SYSTEM - the INST menu comes on.
REPORT/TEST menu.
- set the FDIU menu on the INST - the FDIU menu comes on.
menu.
1EFF : ALL 1 31-33-00Page 503 1 1 Aug 01/05 1 1 1CES 1
DFDR-Test
Figure 501/TASK 31-33-00-991-001- 12 (SHEET 1)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-33-00Page 504 1201-210, 1May 01/05 1 1 1CES 1
DFDR-Test
Figure 501/TASK 31-33-00-991-001- 22 (SHEET 2)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-33-00Page 505 1201-210, 1May 01/05 1 1 1CES 1
DFDR-Test
Figure 501A/TASK 31-33-00-991-001-A12 (SHEET 1)
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-33-00Page 506 1 1 Aug 01/05 1 1 1CES 1
DFDR-Test
Figure 501A/TASK 31-33-00-991-001-A22 (SHEET 2)
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-33-00Page 507 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
set the GND SCAN menu on the - the GND SCAN menu will come on with a
FDIU menu. NO FAULT message,or with a fault message showing the equipment at fault and the ATA Ref.
-
set RETURN on the GND SCAN menu
and continue to push RETURN
until back to MCDU menu.
R **ON A/C 106-149, 211-299, 301-399, 401-499,
Subtask 31-33-00-710-050-A
A. Do the Power Interlocks and System Monitoring Test
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 2(81)
