1EFF : ALL 1 31-32-00Page 509 1 1 Feb 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the line key adjacent to - the SYSTEM REPORT/TEST INST page
the INST indication. comes into view.
6. On the MCDU 1(2): On the MCDU 1(2):
-push the line key adjacent to - the CFDIU menu page comes into view. the CFDIU indication.
7. On the MCDU 1(2): On the MCDU 1(2):
-push the line key adjacent to - if the test is ok, TEST OK comes into the POWER UP TEST RESULT view on the CFDIU POWER UP TEST indication. RESULT page.
5. Close-up
________
Subtask 31-32-00-860-101
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS MENU page comes into view.
(2)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
(3)
Put the system back to the serviceable condition.
(4)
Put the aircraft back to the serviceable condition.
1EFF : ALL 1 31-32-00Page 510 1 1 Feb 01/05R 1 1 1CES 1
TASK 31-32-00-740-003 Ground Scanning of the CFDIU WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
NOTE : IGNORE ALL THE ECAM WARNINGS AS LONG AS THE COMPUTER IS IN THE MENU
____ MODE.
1. Reason for the Job__________________ Self Explanatory
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
3. Job Set-up
__________ Subtask 31-32-00-861-056
A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002)
1EFF : ALL 1 31-32-00Page 511 1 1 Feb 01/05R 1 1 1CES 1
Subtask 31-32-00-865-059
B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 121VU CFDS/CFDIU/SPLY 2TW J18 121VU AUTO FLT/MCDU/2 11CA2 N20
R **ON A/C ALL
R Post SB 31-1163 For A/C 155-156,208-209,
R 121VU CFDS/CFDIU/BACK/UP 8TW J17
R **ON A/C ALL
4. Procedure_________
Subtask 31-32-00-740-052
A. Do this test:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. Adjust the brightness of the MCDU 1(2) screen. - the MCDU 1(2) is on.
2. On the MCDU 1(2): - push the MCDU MENU mode key. On the MCDU 1(2):- the MCDU MENU page comes into view.
3. On the MCDU 1(2): - push the line key adjacent to the CFDS indication. On the MCDU 1(2):- the CFDS MENU page comes into view.
4. On the MCDU 1(2): - push the line key adjacent to the SYSTEM REPORT/TEST indication. On the MCDU 1(2):- the SYSTEM REPORT/TEST page comesinto view.
5. On the MCDU 1(2): On the MCDU 1(2):
1EFF : ALL 1 31-32-00Page 512 1 1 Feb 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 2(47)
