(5) Connect the A/C Tail Number (e.g. AD-ABCD):
-
if the A/C tail number only has six digits (e.g. D-ABCD) use a dot for the first digit and connect the pins for CH1# as follows: PP/AA/y/x/w - (.)
-
if the A/C tail number has seven digits (e.g. AD-ABCD) connect the pins for CH1# as follows: PP/v - (A)
-
connect the pins for CH2# as follows: PP/r - (D)
-
connect the pins for CH3# as follows: PP/n/k/j/h - (-)
-
connect the pins for CH4# as follows: PP/b - (A)
-
connect the pins for CH5# as follows: PP/W - (B)
-
connect the pins for CH6# as follows: PP/P/N - (C)
-
connect the pins for CH7# as follows: PP/J - (D).
5. Close-up
________
Subtask 31-33-00-400-051
A. Install the Coding Plug 197VC-A on the panel 187VU.
Subtask 31-33-00-410-053
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access door 824. (Ref. TASK 52-41-00-410-002)
(3) Remove the access platform(s). R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
Subtask 31-33-00-710-071
C. Do a Check of the Correct Aircraft Coding.
(1)
Close the circuit breaker 8TU.
(2)
Get access to the SYSTEM REPORT / TEST INST page (Ref. TASK 31-32-00-860-008).
(3)
Push the line key adjacent to the <FDIU indication.
(4)
Push the line key adjacent to the <LRU IDENTIFICATION indication.
(5)
Verify the aircraft identification.
R 1EFF : ALL 1 31-33-00Page 230 1 1 May 01/05 1 1 1CES 1R **ON A/C 106-149, 211-299, 301-399, 401-499,
Subtask 31-33-00-710-071-A
C. Do a Check of the Correct Aircraft Coding.
(1)
Close the circuit breaker 5TV.
(2)
Get access to the SYSTEM REPORT / TEST INST page (Ref. TASK 31-32-00-860-008).
(3)
Push the line key adjacent to the <FDIU indication.
(4)
Push the line key adjacent to the SPECIFIC DATA> indication.
(5)
Push the line key adjacent to the <FDIU INFORMATIONS indication.
(6) Verify the aircraft identification.
**ON A/C ALL
Subtask 31-33-00-862-059
D. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits
1EFF : ALL 1 31-33-00Page 231 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 101-105,
TASK 31-33-00-710-012
Adjustment of the Actual Time and Date on the OQAR
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 52-41-00-010-002 Open the Avionics Compartment Doors for Access 52-41-00-410-002 Close the Avionics Compartment Doors after Access
3. Job Set-up
__________
Subtask 31-33-00-861-063
A. Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
R 1EFF : 001-049, 101-105, 1 31-33-00Page 232 1 1 May 01/05 1 1 1CES 1 Subtask 31-33-00-010-058
B. Get Access
(1) Put the access platform in position at the access door 811.
(2)
Open the access door 811 (Ref. TASK 52-41-00-010-002). Subtask 31-33-00-865-072
C.
Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU RCDR/ACCLRM 9TU K18 121VU FDIU & QAR 8TU K17
4. Procedure
_________ Subtask 31-33-00-710-074
A. Adjust the actual Time and Date NOTE : The date and time menu contains two items which show the current
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 2(79)
