曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

NOTE : The n indication is the number____
 of the bus in transfer (from 1
 to 8).
 The xxxxxxx indication is the
 number of bytes or the remaining
 bytes to be transferred. 
R  - when all the data is loaded in the 
R  CFDIU, the TRANS IN PROG then TRANSF
 COMPLETE indication is shown. 
R  5. If the WAIT RESPONSE is shown 
R  continuously on the MDDU: 
R  - open the circuit breaker 3TD. 
R  - eject the disk from the disk 
R  drive of the MDDU. 
R  - after one minute, close the 
R  circuit breaker 3TD. 
R  - do the step 3. again. 
R  6. On the overhead panel, on the  On the display of the Data Loading
 Data Loading Selector:  Selector:
 - push the SEL CTL key  - CFDIU
 NOT SELECTED 
R  indication is shown. 
R  7. Eject the disk from the disk  On the MDDU: 
R  drive of the data loader.  - the < < MDDU READY > > indication is
 shown. 

R  NOTE : The upload operation is satisfactory when:____ 
R  - the TRANSF COMPLETE indication is shown on the multipurpose disk 
R  drive unit, and, 
R  - you get an automatic printout of the uploaded data base (it is 
R  possible that you do not get a full print: some data and/or 
R  pages can be missing). 

R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-32-00Page 310 1401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,

 

 Subtask 31-32-00-280-053
 B. Check of Correct Data Transfer
 (1)
 get the SYSTEM REPORT/TEST/INST menu page (Ref. TASK 31-32-00-860-008).

 (2)
 Check of the identification of the loaded disk(s)

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU:  On the MCDU:
 -push the line key adjacent to  - the CFDIU menu page comes into view. the CFDIU indication.
 2. On the MCDU:  - the LRU IDENTIFICATION page comes
 -push the line key adjacent to  into view with the data base number the LRU IDENTIFICATION adjacent to the DB/N indication. indication.
 5. Close-up
________
 Subtask 31-32-00-860-110

 A. Put the aircraft back to its initial configuration.
 (1)
 On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.

 (2)
 Fully decrease the brightness of the MCDU screen (display off).

 (3)
 Put the disk in the storage box.
 Subtask 31-32-00-080-052

 B.
 Deactivation of the Data Loading System

 (1)
 On the Data Loading Selector, set the ON/OFF switch to OFF.

 (2)
 Make sure that MDDU door is closed

 

R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-32-00Page 311 1401-499, 1Aug 01/05 1 1 1CES 1 Subtask 31-32-00-862-063

 C. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-32-00Page 312 1401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C 062-099,

 TASK 31-32-00-600-001-C
R Uploading of the Maintenance Filter Data Base to the CFDIU with the Portable R Data Loader (SFIM)
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
YV68A110 1 PORTABLE DATA LOADER
 99D31303000002 1 MAINTENANCE FILTER TOOL

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002  Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-008 Procedure to Get Access to the SYSTEM REPORT/TEST/INST Page
 3. Job Set-up
__________
 Subtask 31-32-00-861-080

 A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 2(40)