-a pressure of 3000 +/- 100 psi is displayed.
 At the RAT:
 -
the turbine blades of the RAT do not turn.

At the RAT:

 -
the turbine blades of the RAT turn.

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 582 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------CAUTION : YOU MUST STOP THE TEST
_______ IMMEDIATELY IF THE RAT On the GCU: TURNS MORE THAN 5500 RPM. - the SPEED (RPM) indicator displays
 5000 +/- 250 RPM.
 -supply a pressure of approx.
 206 bar (2987.7766 psi).

 NOTE : Continue with the pump test.
____
 Subtask 29-22-00-720-062
 H. Functional Test of the RAT (Spin-Up and Governing Test) with the FLOW CONTROL TEST KIT - RAT (HFK02)
 WARNING : KEEP ALL PERSONS AWAY FROM THE AREA WHEN YOU PRESSURIZE THE
_______ BLUE HYDRAULIC SYSTEM. WHEN YOU PRESSURIZE THE BLUE HYDRAULIC SYSTEM, THE RAT CAN TURN AT MORE THAN 5000 RPM.
 NOTE : Make sure that the Blue hydraulic system is serviceable.
____
 NOTE : The operation of the Blue electric pump is necessary to pre-charge
____ the Blue hydraulic system accumulator for the spin-up and governing test.
 NOTE : Look at the temperature gage of the FLOW CONTROL TEST KIT - RAT
____ during the test.The test values may out of tolerance if the temperature increases over 60 deg.C (140.00 deg.F). If so, stop the test and let the temperature decrease. Repeat the test.
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the FLOW CONTROL TEST KIT - On the FLOW CONTROL TEST KIT - RAT: RAT:
 -Set the POWER ON/OFF switch to - the SPEED and the PRESSURE indicators
 ON.  display the digit 8 for approximately 2 seconds.
 2. Adjust the flow on the FLOW CONTROL TEST KIT - RAT to 0 l.min (0.0000 USgal.mn).
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 583 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
3. On the overhead panel 50VU:
-Set the P/BSW LEAK MEASUREMENT VALVES/B to OFF.
 4. On the overhead panel 40VU:
-Set the P/BSW BLUE/ELEC PUMP to AUTO.
5. On the overhead panel 50VU:
-Set the P/BSW BLUE PUMP OVRD to ON.
6. On the hydraulic ground-power cart:
 CAUTION : YOU MUST STOP THE TEST
_______ IMMEDIATELY IF THE RAT TURNS MORE THAN 5500 RPM.
-supply a pressure of approx. 206 bar (2987.7766 psi).
 NOTE : Continue with the pump test.
____ On the overhead panel 50VU on theP/BSW:
 -
the OFF light comes on.
On the overhead panel 40VU:

-
the OFF light on the P/BSW is off.
On the overhead panel 50VU:

-
the ON light in the P/BSW comes on.
 The Blue electric pump starts.
 On the HYD page of the lower ECAM DU:

 -a pressure of 3000 +/- 100 psi is displayed.
 At the RAT:
 -
the turbine blades of the RAT do not turn.

At the RAT:

 -
the turbine blades of the RAT turn.On the FLOW CONTROL TEST KIT - RAT:

-
the SPEED (RPM) indicator displays 5000 +/- 250 RPM.

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 584 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1 Subtask 29-22-00-720-060

 J. Functional Test of the RAT (Pump Test) with the RAT - FLOW CONTROL TEST KIT (AE89415Z) and the GROUND - CHECKOUT UNIT, RAT (AGE11212)
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the overhead panel 40VU:
-Set the P/BSW BLUE/ELEC PUMP to OFF.
2. Adjust the flow on the RAT - FLOW CONTROL TEST KIT to 30 l.min (7.9250 USgal.mn).
On the overhead panel 40VU:
-the OFF light in the P/BSW comes on.
 The Blue electric pump stops.
On the GCU:

-a minimum pressure of 2320 psi is displayed.
 -the SPEED (RPM) indicator displays more than 4600RPM
 NOTE : Continue with the RAT running and the anti-stall device test.
____ Subtask 29-22-00-720-063
 K. Functional Test of the RAT (Pump Test) with the FLOW CONTROL TEST KIT -RAT (HFK02)
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊(cè) AMM HYDRAULIC POWER 液壓5(137)