__________________
 Removal of the safety device after maintenance.

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
98D29208246001 1 SAFETY DEVICE - RAT
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-22-00-991-020 Fig. 204
 3. Job Set-up
__________ Subtask 29-22-00-941-083
 A. Make sure that the warning notices are in position to tell persons not to operate the RAT: - on the overhead panels 21VU and 40VU.
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 233 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1

 Subtask 29-22-00-865-105

 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU HYD/RAT/CTL 2801GE D14 106VU CSM/G /EV/MAN/SPLY 6XE B04 121VU HYDRAULIC/RAT/SPLY/EXTN/SOL1 2803GE P33
 Subtask 29-22-00-010-079
 C. Make sure that the access door 195BB is open.
 4. Procedure
_________ (Ref. Fig. 204/TASK 29-22-00-991-020) Subtask 29-22-00-081-053
 A. Removal of the Safety Device
 (1)
 Turn the cross handle (4) of the SAFETY DEVICE - RAT (98D29208246001) anti-clockwise until there is sufficient clearance between the thrust plate (8) and the RAT (1).

 (2)
 Loosen the cross handle (3), move the thrust piece (7) together and remove the SAFETY DEVICE - RAT (98D29208246001) (6) from the structure (2).

 5. Close-up
________ Subtask 29-22-00-865-106
 A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6XE, 2801GE, 2803GE
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 234 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1 Subtask 29-22-00-410-074

 B. Close Access
 (1)
 Remove the warning notice(s).

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (3)
 Close the access door 195BB.

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 235 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1

 BLUE AUXILIARY HYDRAULIC POWER (RAM AIR TURBINE) - ADJUSTMENT/TEST
__________________________________________________________________ TASK 29-22-00-820-001 Adjustment of the RAT Doors WARNING : MAKE SURE THAT THE RAT TRAVEL RANGE IS CLEAR BEFORE YOU
_______ EXTEND/RETRACT THE RAT.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barrier No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
 (8.00
 to 75.00 lbf.ft) 98D29207542000 1 SAFETY DEVICE - RAT

 B.
 Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific lockwire, corrosion-resistant steel, dia 0.8 mm
 (0.032 in.)
 1EFF : ALL 1 29-22-00Page 501 1 1 Config-1 May 01/05R 1 1 1CES 1

 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
 -------------------------------------------------------------------------------
14 cotter pin 29-22-03 02 -118 24 cotter pin 29-22-03 02 -118
 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM HYDRAULIC POWER 液壓5(113)