-
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-43-24-991-001 Fig. 401
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 28-43-24Page 401 1201-213, 1May 01/05 1 1 1CES 1

 3. Job Set-up
__________ Subtask 28-43-24-941-051
 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Put a warning notice in the cockpit to tell persons not to operate the landing gear or the landing gear doors.

 Subtask 28-43-24-010-050
 B. Get Access
 (1) Open the access panel 192MB. NOTE : Do not keep the door open longer than necessary because the
____
 battery can discharge.

 4. Procedure
_________ (Ref. Fig. 401/TASK 28-43-24-991-001) Subtask 28-43-24-020-050
 A. Removal of the Attitude Monitor CAUTION : DO NOT LOOSEN OR REMOVE THE FOUR SCREWS THAT HOLD THE COVER
_______ PLATE. THIS CAN CHANGE THE MOUNTING DATUM OF THE ATTITUDE MONITOR.
 NOTE : Record the position of the washers (3) before you remove the
____ attitude monitor. This is to make sure that the washers (3) are installed in the position that they were removed from.
 (1)
 Remove the three screws (1).

 (2)
 Carefully remove the attitude monitor (2) and the three washers (3) from the aircraft.

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 28-43-24Page 402 1201-213, 1May 01/05 1 1 1CES 1

 Attitude Monitor
 Figure 401/TASK 28-43-24-991-001

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 28-43-24Page 403 1201-213, 1May 01/05 1 1 1CES 1

 TASK 28-43-24-400-001 Installation of the Attitude Monitor WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______ NOTICES ARE IN POSITION.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-007A SEALANT, HIGH TEMP. (Ref. 20-31-00) Material No. 11-026 GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00) Material No. 16-047 F ASNA3687 DECORATIVE PAINT (INTERNAL APPLIC.) (Ref. 20-31-00) Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 28-43-24Page 404 1201-213, 1May 01/05 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-586-002 Lowering of the Aircraft for Maintenance Operations 08-21-00-200-001 Quick Leveling Procedure with the ADIRU 08-22-00-200-001 Precise Leveling 12-11-28-860-001 Procedure to use the ADIRU to Find the Pitch and Roll
 Data 28-43-24-991-001 Fig. 401 28-43-24-991-002 Fig. 402
 3. Job Set-up
__________
 Subtask 28-43-24-941-052
 A. Safety Precautions
 (1)
 Make sure that the safety barriers are in position.

 (2)
 Make sure that the warning notice is in position to tell persons not to operate the landing gear and the related doors.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油6(67)