(21) to seal it to the tank wall.

 (17)
 Connect the fused adapter (24) to the electrical backshell (21).

 (18) Connect the electrical connector (20) to the fused adapter (24). **ON A/C ALL
 Subtask 28-42-44-865-051
 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1QL, 2QL, 3QL, 1QT, 2QT, 8QT.
 1EFF : ALL 1 28-42-44Page 424 1 1 May 01/05R 1 1 1CES 1

 Subtask 28-42-44-410-052
 D. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the MLG doors (Ref. TASK 32-12-00-410-001).

 (3)
 Install the applicable cover(s) 147AZ(148AZ) (Ref. TASK 57-17-11-400-001).

 Subtask 28-42-44-740-052
 E. Test
 (1)
 Do a status report (BITE) of the fuel-quantity indicating system (Ref. TASK 28-42-00-740-001).

 (2)
 Do a functional (BITE) test of the fuel-tank level-sensing system (Ref. TASK 28-46-00-740-001).

 5. Close-up
________ Subtask 28-42-44-942-053
 A. Removal of Equipment
 (1)
 Remove the safety barriers.

 (2)
 Remove the warning notice(s).

 (3)
 Remove the access platform(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 28-42-44Page 425 1 1 May 01/05R 1 1 1CES 1

 TASK 28-42-44-000-002
 Removal of the Center Tank Harness 18QT
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific adhesive tape No specific circuit breaker(s) safety clip(s) No specific safety barriers No specific string No specific warning notice No specific access platform 4 m (13 ft. 1 in.)
 1EFF : ALL 1 28-42-44Page 426 1 1 May 01/05R 1 1 1CES 1

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 28-25-00-650-001 Pressure Defuel 28-25-00-650-003 To Drain Remaining Fuel from the Wing Tanks and the
 Center Tank 28-42-15-000-002 Removal of the Center Tank Fuel-Quantity-Probe (35QT, 36QT, 37QT, 38QT, 39QT) 28-42-15-000-004 Removal of the Center (Transfer) Tank Fuel-Quantity
 Probe (35QT, 36QT, 37QT, 38QT, 51QT)
 28-42-47-000-001 Removal of the Ultracomp (50QT)
 28-46-15-000-004 Removal of the Center-Tank Fuel-Level Sensors
 32-12-00-010-001 Open the Main Gear Doors for Access
 57-17-11-000-001 Removal of the Covers 147AZ (148AZ)

 **ON A/C 001-049, 051-061, 101-105, 201-203,
 28-42-44-991-004 Fig. 402
 **ON A/C 301-399,
 28-42-44-991-004-B Fig. 402A

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Post SB 28-1087 For A/C 001-049,051-061,101-105,201-203,
 28-42-44-991-004-A Fig. 402B
 1EFF : ALL 1 28-42-44Page 427 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL

 3. Job Set-up
__________ Subtask 28-42-44-941-054
 A. Safety Precautions WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
 (1)
 You must obey the fuel safety procedures (Ref. TASK 28-10-00-910-001) when you do work in a fuel tank.

 (2)
 Put the safety barriers in position.

 (3)
 Put a warning notice in position to tell persons not to operate the MLG doors.

 Subtask 28-42-44-865-054
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FUEL/FQI/CHAN/1 1QT A13 121VU FUEL/FQI/CHANNEL/1 AND 2 8QT L26 121VU FUEL/FQI/CHAN/2 2QT M27
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油6(24)