曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  210QM, 211QM 
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ 
R  START A TASK ON OR NEAR: 
R  - THE FLIGHT CONTROLS 
R  - THE FLIGHT CONTROL SURFACES 
R  - THE LANDING GEAR AND THE RELATED DOORS 
R  - COMPONENTS THAT MOVE. 
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ 
R  GEAR. 
R  1. Reason for the Job__________________ 
R  Self Explanatory 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  safety barriers 
R  No specific  adjustable access platform 4 m (13 ft. 1 in.) 
R  B. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  28-00-00-910-001  Fuel Safety Procedures 
R  28-43-21-991-003  Fig. 403

 

R  3. Job Set-up__________ 
R  Subtask 28-43-21-941-059 
R  A. Safety Precautions 
R  WARNING : OBEY THE FUEL SAFETY PROCEDURES._______ 
R  (1) You must obey the fuel safety procedures (Ref. TASK 28-00-00-910-001) 
R  when you do work on the fuel system. 
R  (2) Put the safety barriers in position. 
R  Subtask 28-43-21-010-053 
R  B. Get Access 
R  (Ref. Fig. 403/TASK 28-43-21-991-003) 
R  (1) Put the adjustable access platform in position under the applicable 
R  Magnetic-Level-Indicator (MLI) rod. 
R  4. Procedure_________ 
R  (Ref. Fig. 403/TASK 28-43-21-991-003) 
R  Subtask 28-43-21-020-052 
R  A. Removal of the Magnetic-Level Indicator Rod 
R  (1) Push the MLI rod (2) in against the spring (4) and turn it through 90 
R  deg. to release. 
R  (2) Pull the MLI rod (2) out until the magnet (1) touches the seal (3). 
R  Continue to pull until the MLI rod is out of the housing.

 

R  Magnetic-Level-Indicator Rod 
R  Figure 403/TASK 28-43-21-991-003
 1EFF :  301-399,  1  28-43-21 Page 421 
1  1  May 01/04
 1  1
 1CES  1

 

R  TASK 28-43-21-400-003 
R  Installation of the Magnetic-Level-Indicator Rod 104QM Thru 111QM, 204QM, 
R  205QM, 210QM, 211QM 
R  WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING_______ 
R  NOTICES ARE IN POSITION. 
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ 
R  GEAR. 
R  1. Reason for the Job__________________ 
R  Self Explanatory 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  safety barriers 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-004  USA MIL-T-81533 
R  1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) 
R  (Ref. 20-31-00) 
R  Material No. 19-003  USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  28-00-00-910-001  Fuel Safety Procedures 
R  28-43-21-991-003  Fig. 403

 1EFF : 301-399, 1 28-43-21Page 422 1 1 May 01/04 1 1 1CES 1 1EFF : 301-399, 1 28-43-21Page 423 1 1 May 01/04 1 1 1CES 1 1EFF : 301-399, 1 28-43-21Page 424 1 1 May 01/04 1 1 1CES 1 TASK 28-43-21-000-004
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油6(48)