-
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 282400-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking cap No specific blanking plug No specific circuit breaker(s) safety clip(s) No specific fuel container No specific safety barriers No specific warning notice No specific adjustable access platform 3 m (9 ft. 10 in.) 98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010  USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
 1EFF : ALL 1 28-24-00Page 529 1 1 May 01/04R 1 1 1CES 1

 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
gasket 73-11-11 01A-070
 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
 from the External Power
 28-00-00-910-001 Fuel Safety Procedures
 31-60-00-860-001 EIS Start Procedure
 31-60-00-860-002 EIS Stop Procedure
 57-41-37-000-003 Removal of the Access Panel 522AT(622AT)
 57-41-37-400-003 Installation of the Access Panel 522AT(622AT)
 71-13-00-010-040 Opening of the Fan Cowl Doors
 71-13-00-410-040 Closing of the Fan Cowl Doors
 73-11-11-000-041 Removal of the Main Fuel Supply Hose
 73-11-11-400-041 Installation of the Main Fuel Supply Hose

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 28-24-00-991-002 Fig. 501
 **ON A/C 301-399,
 28-24-00-991-002-A Fig. 501A
 **ON A/C ALL
 28-24-00-991-005 Fig. 503
 3. Job Set-up
__________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 (Ref. Fig. 501/TASK 28-24-00-991-002)
 1EFF : ALL 1 28-24-00Page 530 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 28-24-00Page 531 1 1 May 01/04 1 1 1CES 1

R  **ON A/C 301-399, 
R  (Ref. Fig. 501A/TASK 28-24-00-991-002-A) 
R  **ON A/C ALL 
R  (Ref. Fig. 503/TASK 28-24-00-991-005)
 Subtask 28-24-00-941-057
 A. Safety Precautions
 WARNING : OBEY THE FUEL SAFETY PROCEDURES._______
 (1) You must obey the fuel safety procedures (Ref. TASK 28-00-00-910-001) when you do work on the fuel system.
 (2) Put the safety barriers in position.
 (3) Put a warning notice in position to tell persons not to operate the slats or the flaps.
 Subtask 28-24-00-860-056
 B. Aircraft Maintenance Configuration
 (1) Make sure each wing fuel tank contains a minimum of 1000 kg (2205 lb) of fuel. Refuel if necessary (Ref. TASK 12-11-28-650-003).
 (2) On the panel 40VU, make sure that the ENG 1 and ENG 2 FIRE pushbutton switches (P/BSW) are in the closed and guarded position.
 (3) On the panel 115VU, make sure that the ENG/MASTER 1 and ENG/MASTER 2 switches are in the OFF position.
 (4) Make sure that there is a warning notice on the panel 20VU, to tell persons not to operate the ENG 1 and ENG 2 FIRE P/BSW.
 (5) Make sure that there is a warning notice on the panel 115VU, to tell persons not to operate the ENG/MASTER 1 and 2 switches.

 Main Fuel Feed Line - Location and Detail Figure 503/TASK 28-24-00-991-005
 1EFF : 1 1R 1CES  ALL  1 11 1 28-24-00 Page 532 May 01/04

 Subtask 28-24-00-010-054
 C. Get Access
 (1)
 Put the adjustable access platform in position next to the applicable pylon.

 (2)
 Open the engine fan-cowl doors (Ref. TASK 71-13-00-010-040).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油4(8)