(2)
Install the ADAPTER - VENT AND DRAIN VALVE, APU (98A28007570000).
(3)
Put a container below the APU fuel vent and drain valve to collect the fuel.
1EFF : ALL 1 28-29-41Page 402 1 1 Feb 01/98 1 1 1CES 1 Subtask 28-29-41-650-051
F. On the front firewall FR80 at the tail cone:
(1)
Push and hold the VENT APU FUEL LINE pushbutton switch (8QC).
(2)
When the flow of the fuel stops (2 liters), release the VENT APU FUEL LINE pushbutton switch (8QC).
Subtask 28-29-41-080-050
G. Removal of the Adapter
(1)
Remove the container.
(2)
Remove the ADAPTER - VENT AND DRAIN VALVE, APU (98A28007570000).
(3) Install the blanking plug on the APU fuel vent and drain valve. Subtask 28-29-41-862-050
H. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
Subtask 28-29-41-010-050
J. Get Access
(1)
Put the access platform in position under the main door of the left main gear.
(2)
Open the main door of the left main gear (Ref. TASK 32-12-00-010-001).
(3)
Remove the manhole cover 147AZ (Ref. TASK 57-17-11-000-001).
(4)
Remove the APU fuel LP valve actuator 3QF (Ref. TASK 28-29-51-000-001).
Subtask 28-29-41-910-050
K. You must obey the special fuel safety procedures when you work in the fuel tank (Ref. TASK 28-10-00-910-001) and (Ref. TASK 28-10-00-910-002).
1EFF : ALL 1 28-29-41Page 403 1 1 Feb 01/98 1 1 1CES 1
4. Procedure
_________
(Ref. Fig. 401/TASK 28-29-41-991-001) Subtask 28-29-41-020-050
A. Removal of the APU Fuel LP Valve
(1)
Put a container below the valve (5).
(2)
Remove the screw (21), the washer (20) and disconnect the bonding strips (18) and (19).
(3)
Remove the nut (15), the bolt (14) and disconnect the bonding strips
(12) and (13).
(4)
Loosen the nut (11).
(5)
Remove the screws (23) and the washers (24).
(6)
Remove the lines (17) and (22). Remove and discard the O-ring (25).
(7)
Remove the nuts (6).
(8)
Disconnect the line (7) from the valve (5). NOTE : Play at the connections between the lines (7), (8) and (10)
____
will help you release the line (7).
(9)
Remove and discard the O-ring (16).
(10)
Remove the screws (2) and the washers (3).
(11)
Remove the valve (5). Remove and discard the O-rings (4) and (9).
(12)
Put the blanking plugs on the disconnected pump (26) end and on the disconnected lines (7), (17) and (22) ends.
1EFF : ALL 1 28-29-41Page 404 1 1 Feb 01/98 1 1 1CES 1
APU Fuel LP Valve
Figure 401/TASK 28-29-41-991-001
1EFF : ALL 1 28-29-41 Page 405
1 1 Feb 01/98
1 1
1CES 1
TASK 28-29-41-400-001
Installation of the APU Fuel Low-Pressure Valve (14QM)
WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 1.65 m (5 ft. 5 in.)
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油4(147)
