-
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific access platform 3.0 m (9 ft. 10 in.)
 98D57004014000 1 HOOK-COVER (RIB2-SURGE DOORS)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 28-25-00-650-001 Pressure Defuel 28-25-00-650-003 To Drain Remaining Fuel from the Wing Tanks and the
 Center Tank
 57-27-11-000-001  Removal of the Access Panel (540AB, 540BB, 540CB, 540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-45Page 401 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

28-21-45-991-004 Fig. 401
 3. Job Set-up
__________ Subtask 28-21-45-941-050
 A. Safety Precautions WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
 (1) You must obey the fuel safety procedures (Ref. TASK 28-10-00-910-001) when you do work in a fuel tank.
 (2) Put the safety barriers in position. Subtask 28-21-45-865-050
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU FUEL/L WING TK/PUMP2 SPLY 7QA N26 121VU FUEL/L WING TK/PUMP1 SPLY 1QA N23 121VU FUEL/R WING TK/PUMP2 SPLY 8QA Q26 121VU FUEL/R WING TK/PUMP1 SPLY 2QA Q23 123VU L WING TK/PUMP 1/STBY SPLY 11QA AD12 123VU R WING TK/PUMP 1/STBY SPLY 12QA AE12
 Subtask 28-21-45-650-052
 C. Fuel Configuration
 (1)
 Defuel the applicable fuel tank (Ref. TASK 28-25-00-650-001).

 (2)
 Drain the remaining fuel from the applicable fuel tank (Ref. TASK 28-25-00-650-003).

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-45Page 402 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 28-21-45-010-050

 D. Get Access
 (1)
 Put the access platform in position below the applicable access panel 540AB(640AB).

 (2)
 Remove the applicable access panel 540AB, 640AB (Ref. TASK 28-10-00-910-002), (Ref. TASK 57-27-11-000-001).

 (3)
 Open the applicable access door 540BZ, 640BZ and install the HOOK-COVER (RIB2-SURGE DOORS) (98D57004014000).

 4. Procedure
_________
 (Ref. Fig. 401/TASK 28-21-45-991-004) Subtask 28-21-45-020-051
 A. Removal of the Sequence Valve
 (1)
 Remove the bolts (8) and then the sequence valve assembly from the pump canister. Remove and discard the O-ring (1).

 (2)
 Remove the bolts (3), move the mounting plate (9) and the elbow (5) apart and discard the O-ring (2).

 (3)
 Remove the bolts (4), move the elbow (5) and the sequence valve (7) apart and discard the O-ring (6).

 NOTE : It is possible to adapt this procedure to remove only part of
____
 the assembly.

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-45Page 403 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 Sequence Valves - Wing-Fuel-Tank Inner-Cell
 Figure 401/TASK 28-21-45-991-004

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-45Page 404 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 TASK 28-21-45-400-003

 Installation of the Sequence Valve
 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______ NOTICES ARE IN POSITION.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油3(39)