曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  00-400-001). 
R  (7) Install the bolts (7) and the nuts (10). Tighten the nuts (10). 
R  (8) Install the bolt (3), the bonding strap (2) and the nut (1) 
R  (Ref. TASK 20-28-00-912-002). 
R  Subtask 28-21-43-410-051 
R  C. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) Remove the HOOK-COVER (RIB2-SURGE DOORS) from the applicable 
R  spring-loaded surge door 540BZ, 640BZ. Make sure that the applicable 
R  spring-loaded surge door closes correctly. 
R  (3) Install the applicable access panel (Ref. TASK 28-10-00-910-002), 
R  (Ref. TASK 57-27-11-400-001): 
R  - FOR 149QM, 150QM 
R  install 540AB 
R  - FOR 151QM, 152QM 
R  install 640AB. 
R  Subtask 28-21-43-865-054 
R  D. Remove the safety clip(s) and the tag(s) and close this(these) circuit 
R  breaker(s): 
R  1QA, 2QA, 7QA, 8QA, 11QA, 12QA. 
R  Subtask 28-21-43-710-050 
R  E. Test 
R  (1) Do an operational test of the main fuel pump system (Ref. TASK 28-21-
R  00-710-001).

 

R  5. Close-up________ 
R  Subtask 28-21-43-650-053 
R  A. Fuel Configuration 
R  (1) Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-
R  003), (Ref. TASK 28-25-00-650-001) or (Ref. TASK 28-25-00-869-001). 
R  Subtask 28-21-43-942-053 
R  B. Removal of Equipment 
R  (1) Remove the safety barriers. 
R  (2) Remove the warning notice(s). 
R  (3) Remove the access platform(s). 
R  (4) Remove the ground support and maintenance equipment, the special and 
R  standard tools and all other items.

 

 TASK 28-21-43-000-003 Removal of the Fuel-Pump Check-Valve 37QM(38QM) WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs
 No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific access platform 2.8 m (9 ft. 2 in.)

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-43Page 423 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 28-25-00-650-001 Pressure Defuel 28-25-00-650-003 To Drain Remaining Fuel from the Wing Tanks and the
 Center Tank
 57-27-11-000-002  Removal of the Access Panel (540HB, 540JB, 540KB, 540LB, 540MB, 540NB, 540PB, 540QB, 540RB, 550AB, 550BB, 550CB, 550DB, 560AB, 640HB, 640JB, 640KB, ....)
 28-21-43-991-003  Fig. 403
 3. Job Set-up
__________
 Subtask 28-21-43-941-057
 A. Safety Precautions
 WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
 (1)
 You must obey the fuel safety procedures (Ref. TASK 28-10-00-910-001) when you do work in a fuel tank.

 (2)
 Put the safety barriers in position.

 Subtask 28-21-43-650-054
 B. Fuel Configuration
 (1)
 Defuel the applicable fuel tank (Ref. TASK 28-25-00-650-001).

 (2)
 Drain the remaining fuel from the applicable fuel tank (Ref. TASK 28-25-00-650-003).

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-43Page 424 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 28-21-43-865-056

 C. Open, safety and tag this(these) circuit breaker(s):
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油3(36)