(3)
 Make sure that the work area is clean and clear of tool(s) and other items.

 Subtask 27-14-51-865-058
 D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 15CE1, 15CE2, 16CE1, 16CE2.
 Subtask 27-14-51-710-052
 E. Test
 (1)
 Do an operational test of the aileron (Ref. TASK 27-14-00-710-001).

 (2)
 Examine the servovalve (3) for leaks.

 1EFF : ALL 1 27-14-51Page 465 1 1 Feb 01/03R 1 1 1CES 1

 5. Close-up
________
 (Ref. Fig. 404/TASK 27-14-51-991-005) Subtask 27-14-51-410-052
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the applicable access panel:

 -for the left wing, panel 575KB
 -for the right wing, panel 675KB. Subtask 27-14-51-942-056
 B. Removal of Equipment
 (1)
 Remove the safety barriers.

 (2)
 Remove the warning notice(s).

 (3)
 Remove the access platform(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 27-14-51Page 466 1 1 Feb 01/03R 1 1 1CES 1

 TASK 27-14-51-000-004
 Removal of the Aileron Servo-Control Solenoid Valve
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific protective cover
 No specific safety barriers
 No specific warning notice
 No specific container 1 l (0.2641 USgal)
 No specific access platform 4 m (13 ft. 1 in.)

 1EFF : ALL 1 27-14-51Page 467 1 1 Feb 01/03R 1 1 1CES 1

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-910-002 Safety Procedures of the Hydraulic System 29-10-00-864-001 Depressurize the Green Hydraulic System 29-10-00-864-003 Depressurize the Blue Hydraulic System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-23-00-860-001 Disconnection of the Isolation Coupling of the Power
 Transfer Unit (PTU) 27-14-51-991-006 Fig. 405
 3. Job Set-up
__________
 (Ref. Fig. 405/TASK 27-14-51-991-006) Subtask 27-14-51-941-058
 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Put a warning notice in the cockpit to tell persons not to pressurize the Green or the Blue hydraulic systems.

 (3) Obey the hydraulic safety procedures (Ref. TASK 29-00-00-910-002). Subtask 27-14-51-860-057
 B. Aircraft Maintenance Configuration
 WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.

_______
 (1)
 Disconnect the Isolation Coupling of the Power Transfer Unit (PTU) (Ref. TASK 29-23-00-860-001).

 (2)
 Make sure that the Green and the Blue hydraulic systems are depressurized (Ref. TASK 29-10-00-864-001) (Ref. TASK 29-10-00-864-003).

 (3)
 Depressurize the Green and the Blue hydraulic system reservoirs (Ref. TASK 29-14-00-614-001).

 1EFF : ALL 1 27-14-51Page 468 1 1 Feb 01/03R 1 1 1CES 1

 Aileron Servo-Control Solenoid Valve Figure 405/TASK 27-14-51-991-006
 1EFF : 1 1R 1CES  ALL  1 11 1 27-14-51 Page 469 Feb 01/03
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱1(123)