1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-63Page 415 1201-299, 1Aug 01/05R 1 1 1CES 1
(g) Install the related circuit breaker panel (21) with the quick release fasteners (20).
(4) Installation of the NS/FSB with LED's of the C/B panel 2000VU and 2001VU
(a)
Clean the component interface and/or the adjacent area.
(b)
Do an inspection of the component interface and/or the adjacent area.
(c)
Connect the electrical connector (19) as identify during the removal procedure.
(d)
Install the NS/FSB sign (18) into the related circuit breaker panel (21).
NOTE : Make sure that you hear a click , when the spring clips
____ (17) locks into position.
(e) Make sure that the work area is clean and clear of tool(s) and other items.
R **ON A/C 106-149, 301-399, 401-499,
Subtask 23-73-63-420-050-A
A. Installation of the No Smoking/Fasten Seat Belt (NS/FSB) Sign
(1) Installation of the No Smoking/Fasten Seat Belt (NS/FSB) Sign to the PSIU
(a)
Clean the component interface and/or the adjacent area.
(b)
Do an inspection of the component interface and/or the adjacent area.
(c)
Connect the electrical connector (10) as identified during the removal procedure.
(d)
Install the NS/FSB housing (8) into the related PSIU (3). NOTE : Make sure that the spring clips (9) lock into position
____
with a click.
R 1EFF : ALL 1 23-73-63Page 416 1 1 Aug 01/05 1 1 1CES 1
(e)
Make sure that the work area is clean and clear of tool(s) and other items.
(f)
Lift the PSIU (3) and engage it in the mounting rail (2).
(g)
Install the section-hose (1) with the PULLEY ASSEMBLY - SEALING CORD to the mounting rail (2).
NOTE : Make sure that the section-hose is not expanded. Move the
____ pulley assembly forward and rearward to prevent this.
(2) Installation of the No Smoking/Fasten Seat Belt (NS/FSB) Sign to the C/B panels 2000VU and 2001VU
(a)
Clean the component interface and/or the adjacent area.
(b)
Do an inspection of the component interface and/or the adjacent area.
(c)
Connect the electrical connector (11) as identify during the removal procedure.
(d)
Install the NS/FSB sign (12) into the related circuit breaker panel (5).
NOTE : Make sure that the spring clips (13) lock into position
____
with a click.
(e)
Make sure that the work area is clean and clear of tool(s) and other items.
(f)
Install the related circuit breaker panel (5) with the quick release fasteners (7).
**ON A/C ALL
Subtask 23-73-63-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 154RH, 155RH, 158RH, 159RH, 172RH, 179RH, 163RH, 164RH, 165RH, 166RH, 167RH, 168RH, 195RH, 196RH.
R 1EFF : ALL 1 23-73-63Page 417 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
Subtask 23-73-63-865-071
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 173RH, 174RH, 197RH, 198RH.
**ON A/C ALL
Subtask 23-73-63-869-050
D. Make sure that the Cabin Intercommunication Data System (CIDS) is
energized (Ref. TASK 23-73-00-861-001).
Subtask 23-73-63-710-050
E. Do this operational test.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the SIGNS panel 25VU: In the cabin:
-
set the SEAT BELTS and NO - the related NS/FSB sign comes on. SMOKING switches to ON.
-
set the SEAT BELTS and NO - the related NS/FSB sign goes off. SMOKING switches to OFF.
5. Close-up
________ Subtask 23-73-63-862-050
A. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
1EFF : ALL 1 23-73-63Page 418 1 1 Aug 01/05R 1 1 1CES 1
LIGHT - READING - REMOVAL/INSTALLATION
______________________________________
TASK 23-73-64-000-001
Removal of the Reading Light
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊4(170)
