R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-18Page 405 1201-299, 1May 01/05 1 1 1CES 1 Subtask 23-73-18-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R **ON A/C 001-049, 051-099, 101-105, 201-299,
121VU COM NAV/CIDS/PROG AND TST PNL 161RH M06 **ON A/C 151-199,
121VU COM NAV/CIDS/PROG &/TST PNL 161RH M07 R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
4. Procedure
_________
(Ref. Fig. 401/TASK 23-73-18-991-001)
Subtask 23-73-18-420-050
A. Installation of the programming and test panel
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
(3)
Install the Cabin Assignment Module (Ref. TASK 23-73-19-400-001).
(4)
Install the brackets (2) to the programming and test panel (1) with the screws (3) and the washers (4).
(5)
Remove the blanking caps from the electrical connectors.
(6)
Connect the electrical connector (11) to the programming and test panel (1).
(7)
Install the programming and test panel (1) with the screws (5) and the washers (6).
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-18Page 406 1201-299, 1May 01/05 1 1 1CES 1
(8)
Install the cover (9) with the screws (7) and the washers (8).
(9)
Close the access door (10).
(10) Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 23-73-18-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 161RH
Subtask 23-73-18-740-050
C. Do the BITE test of the Cabin Intercommunication Data System (CIDS) (Ref. TASK 23-73-00-740-005).
5. Close-up
________ Subtask 23-73-18-862-050
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-18Page 407 1201-299, 1May 01/05 1 1 1CES 1
MODULE - CABIN ASSIGNMENT (115RH) - REMOVAL/INSTALLATION
________________________________________________________ TASK 23-73-19-000-001 Removal of the Cabin Assignment Module (115RH)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 23-73-19-991-001 Fig. 401
3. Job Set-up
__________ Subtask 23-73-19-861-050
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-19Page 401 1201-299, 1Config-1 May 01/05 1 1 1CES 1 Subtask 23-73-19-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R **ON A/C 001-049, 051-099, 101-105, 201-299,
121VU COM NAV/CIDS/PROG AND TST PNL 161RH M06 **ON A/C 151-199,
121VU COM NAV/CIDS/PROG &/TST PNL 161RH M07 R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
4. Procedure
_________
(Ref. Fig. 401/TASK 23-73-19-991-001)
Subtask 23-73-19-020-050
A. Removal of the cabin assignment module 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊4(106)
