(2)
 Remove the module (1).

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-19Page 402 1201-299, 1Config-1 May 01/05 1 1 1CES 1

 Cabin Assignment Module (115RH) - Removal/Installation
 Figure 401/TASK 23-73-19-991-001

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-19Page 403 1201-299, 1Config-1 May 01/05 1 1 1CES 1

 TASK 23-73-19-400-001
 Installation of the Cabin Assignment Module (115RH)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-73-00-740-005 BITE Test of the Cabin Intercommunication Data System
 (CIDS) through the CFDS 23-73-00-860-002 Cabin Layout Selection 24-42-00-861-001 Energize the Ground Service Network from the External
 Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 23-73-19-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 23-73-19-861-051
 A. Make sure that the ground service network is energized
 (Ref. TASK 24-42-00-861-001).

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-19Page 404 1201-299, 1Config-1 May 01/05 1 1 1CES 1 Subtask 23-73-19-865-051

 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------

R **ON A/C 001-049, 051-099, 101-105, 201-299,
 121VU COM NAV/CIDS/PROG AND TST PNL 161RH M06 **ON A/C 151-199,
 121VU COM NAV/CIDS/PROG &/TST PNL 161RH M07 R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
 4. Procedure
_________ (Ref. Fig. 401/TASK 23-73-19-991-001) Subtask 23-73-19-420-050 R A. Installation of the Cabin Assignment Module (CAM).
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Install the module (1).

 (4)
 Lock the quick-release fasteners (2).

 (5)
 Make sure that the work area is clean and clear of tool(s) and other items.

 Subtask 23-73-19-865-053
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 161RH
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-19Page 405 1201-299, 1Config-1 May 01/05 1 1 1CES 1

 Subtask 23-73-19-740-050 
R R  C. Do the BITE test of the Cabin Intercommunication Data System (CIDS) (Ref. TASK 23-73-00-740-005).
 5. Close-up________
 Subtask 23-73-19-860-051 
R R  A. Make sure that the required cabin layout is selected in the Cabin Assignment Module (CAM) (Ref. TASK 23-73-00-860-002).
 Subtask 23-73-19-862-050
 B. De-energize the ground service network (Ref. TASK 24-42-00-862-001). 

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-19Page 406 1201-299, 1Config-1 May 01/05 1 1 1CES 1

 MODULE - CABIN ASSIGNMENT (115RH) - REMOVAL/INSTALLATION
________________________________________________________ TASK 23-73-19-000-002 Removal of the Cabin Assignment Module (115RH)
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific 1 PIN - NON METALLIC
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power 23-73-19-991-002 Fig. 401
 3. Job Set-up
__________ Subtask 23-73-19-861-052
 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001)

R 1EFF : 106-149, 301-399, 401-499, 1 23-73-19Page 401 1 1 Config-2 Aug 01/05 1 1 1CES 1
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊4(107)