曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 Subtask 23-61-42-865-050
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 49VU FLIGHT CONTROLS/FLP/CTL AND MONG/SYS1 6CV B07 49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18 121VU FLIGHT CONTROLS/FLP/CTL AND/MONG/SYS2 8CV Q21 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
 Subtask 23-61-42-010-050
 C. Get Access
 (1)
 Put the adjustable access platform adjacent to the applicable static discharger.

 (2)
 Remove the static discharger (Ref. TASK 23-61-41-000-001).

 1EFF : ALL 1 23-61-42Page 402 1 1 May 01/04 1 1 1CES 1

 4. Procedure
_________
 Subtask 23-61-42-020-051
 A. Removal of the Static Discharger Retainers zone 324 (Tailplane), 326 (Rudder), 330 (340) (Trimmable Horizontal Stabilizer) (Ref. Fig. 401/TASK 23-61-42-991-002)
 (1)
 Carefully remove the rivets (1) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (2).

 (2)
 Carefully remove the rivets (3) with a drill, so that you do not make the holes larger. Remove the static discharger (4).

 (3)
 Carefully remove the rivets (5) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (6).

 (4)
 Carefully remove the rivets (23) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (24).

 (5)
 Carefully remove the rivets (25) and (26) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (27).

 (6)
 Carefully remove the rivets (28) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (29).

 (7)
 Carefully remove the rivets (30) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (31).

 Subtask 23-61-42-020-052
 B. Removal of the Static Discharger Retainers Zone 470 (480) (Engine Pylon), 531 (631), 532 (632) and 533 (633) (Flap Track Fairings) (Ref. Fig. 402/TASK 23-61-42-991-003)
 (1)
 Carefully remove the rivets (22) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (21).

 (2)
 Carefully remove the rivets (15) and (16) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (17).

 1EFF : ALL 1 23-61-42Page 403 1 1 Feb 01/98 1 1 1CES 1

 Static Discharger Retainers - Tailplane, Rudder and THS
 Figure 401/TASK 23-61-42-991-002- 12 (SHEET 1)

 1EFF : ALL 1 23-61-42Page 404 1 1 Feb 01/98 1 1 1CES 1

 Static Discharger Retainers - Tailplane, Rudder and THS
 Figure 401/TASK 23-61-42-991-002- 22 (SHEET 2)

 1EFF : ALL 1 23-61-42Page 405 1 1 Feb 01/98 1 1 1CES 1

 Static Discharger Retainers - Engine Pylon and Flap Track Fairings Figure 402/TASK 23-61-42-991-003- 12 (SHEET 1)
 1EFF : ALL 1 23-61-42Page 406 1 1 Feb 01/98 1 1 1CES 1

 Static Discharger Retainers - Engine Pylon and Flap Track Fairings Figure 402/TASK 23-61-42-991-003- 22 (SHEET 2)
 1EFF : ALL 1 23-61-42Page 407 1 1 Feb 01/98 1 1 1CES 1

 Static Discharger Retainers - Ailerons
 Figure 403/TASK 23-61-42-991-004
 1EFF :  ALL  1  23-61-42 Page 408 
1  1  Feb 01/98
 1  1
 1CES  1

 

 Static Discharger Retainers - Wing Tips
 Figure 404/TASK 23-61-42-991-005
 1EFF :  ALL  1  23-61-42 Page 409 
1  1  Feb 01/98
 1  1
 1CES  1

 

 Static Discharger Retainers - Wing Tip Fences
 Figure 405/TASK 23-61-42-991-006
 1EFF :  ALL  1  23-61-42 Page 410 
1  1  Feb 01/98
 1  1
 1CES  1

 

 Subtask 23-61-42-020-053
 C. Removal of the Static Discharger Retainers Zone 590 (690) (Ailerons) (Ref. Fig. 403/TASK 23-61-42-991-004)
 (1)
 Carefully remove the rivets (7) and (8) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (10), then remove and discard the washer (9).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊3(10)