PRESSURE CONTROL AND MONITORING - DEACTIVATION/REACTIVATION
___________________________________________________________
 TASK 21-31-00-040-001
 Verification Test (Safety Valves and Outflow Valve)
 1. Reason for the Job
__________________
 Refer to the MMEL TASK: 21-31-04
 Pressure Control and Monitoring
 Safety Valve

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power R 25-33-41-000-001 Removal of the AFT Galley Unit (6480MM) 31-32-00-860-002 Procedure to Get Access to the SYSTEM REPORT/TEST/AIR
 COND Page
 31-60-00-860-001 EIS Start Procedure
 31-60-00-860-002 EIS Stop Procedure
 34-10-00-860-002 ADIRS Start Procedure
 34-10-00-860-005 ADIRS Stop Procedure

 3. Job Set-up
__________
 Subtask 21-31-00-861-059
 A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
 Subtask 21-31-00-865-059
 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AIR COND/CAB/PRESS/CTL1 1HL D09 122VU AIR COND/CAB PRESS/CTL/MAN 3HL Y23 122VU AIR COND/CAB PRESS/CTL/2 2HL Y22

 Subtask 21-31-00-010-056 
R  C. Get Access 
R R R  (1) Remove the food trolleys, the trolley partition, and the access panel as shown (Ref. TASK 25-33-41-000-001) and get access to the safety valves through the rear galley wall.
 Subtask 21-31-00-860-051
 D. Aircraft Maintenance Configuration
 (1) Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001).
 (2) On the ECAM control panel push the PRESS pushbutton switch, the CAB PRESS page comes into view on the lower ECAM display unit.
 (3) On one MCDU get the SYSTEM REPORT/TEST AIR COND menu page (Ref. TASK 31-32-00-860-002).
 (4) On the AIR COND panel 30VU, make sure that: - the PACK 1 and the PACK 2 pushbutton switches are in the OFF position (the OFF legends are on). - the RAM AIR pushbutton switch is in the OFF position (the ON legend is off).
 (5) On the CABIN PRESS panel 25VU, make sure that: - the MODE SEL pushbutton switch is in the AUTO configuration (with the FAULT and MAN legends off). - the LDG ELEV selector is in the AUTO position. - the DITCHING pushbutton switch is in the AUTO configuration (with the ON legend off).
 (6) Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
 (7) On the ADIRS CDU panel 20VU: - make sure that the 3 OFF/NAV/ATT switches are in the NAV position and that the ADR 1, ADR 2 and ADR 3 pushbutton switches are in the on position (with the FAULT and OFF legends off).

 4. Procedure
_________ Subtask 21-31-00-710-064
 A. Verification Test Part 1.
 (1) Operational Test of the Safety Valve Position Indicator NOTE : The test procedure is the same for the safety valves 6HL and
____
 7HL.

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On one of the safety valves:  On the ECAM lower display unit:
 - push the valve diaphragm until the spring is compressed.  - the green SAFETY indication changesto amber and the valve symbol opens and changes to amber.
 On the panels 130VU and 132VU: - the amber light in the two MASTER CAUTION pushbutton switches come on. - the single audio warning is heard.
 On the ECAM upper display unit:
 - the warning message CAB PR SAFETY VALVE OPEN comes on.
 - release the diaphragm.  On the ECAM lower display unit:
 - the open valve symbol closes and changes to green and the amber SAFETY indication changes to green.
 On the panels 130VU and 132VU:
 - the amber light in the two MASTER CAUTION pushbutton switches go off.
 On the ECAM upper display unit:
 - the warning message CAB PR SAFETY VALVE OPEN goes off.

 1EFF : ALL 1 21-31-00Page 403 1 1 Nov 01/98R 1 1 1CES 1

 NOTE : Do this test again for the other safety valve.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AIR CONDITIONING 空調 3(5)