曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

by INSERT UPLINK (2R field). Pressing the 2R key will insert the flight plan into the secondary.
Clearing the prompt will reject it.
If a temporary flight plan or a DIR TO is in progress, the uplink insertion is not accepted until the
temporary flight plan or the DIR TO is completed.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
AOC FUNCTIONS
A330/A340 FLEET DSC-22_20-70 P 3/10
FCOM 19 AUG 10
TAKEOFF DATA
Applicable to: ALL
The takeoff data may be requested in the preflight or done phase for the active flight plan only. It is
always associated with the active flight plan message.
REQUEST FOR TAKEOFF DATA
In order to obtain takeoff data from the ground station :
SELECT the PERF TAKEOFF page or UPLINK XX TO DATA page.
PRESS the [6L] key.
SEND the request by pressing the “TO DATA REQUEST” [6R] key.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
AOC FUNCTIONS
A330/A340 FLEET DSC-22_20-70 P 4/10
FCOM 19 AUG 10
When TO DATA REQUEST is sent, data of the TO DATA REQ page are locked in and the star
displayed on 6R field is removed.
Applicable to: ,
REQUEST FOR TAKEOFF DATA
In order to obtain takeoff data from the ground station :
SELECT the PERF TAKEOFF page or UPLINK XX TO DATA page.
PRESS the [6L] key.
SEND the request by pressing the “TO DATA REQUEST” [6R] key.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
AOC FUNCTIONS
A330/A340 FLEET DSC-22_20-70 P 5/10
FCOM 19 AUG 10
When TO DATA REQUEST is sent, data of the TO DATA REQ page are locked in and the star
displayed on 6R field is removed.
Applicable to: ALL
PROCEDURE TO INSERT OR DELETE UPLINK TAKEOFF DATA
PRESS the 6L key “RECEIVED TO DATA” when the message TAKEOFF DATA UPLINK is
displayed.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
AOC FUNCTIONS
A330/A340 FLEET DSC-22_20-70 P 6/10
FCOM 19 AUG 10
This displays the uplink data on 2 different pages : UPLINK MAX TO DATA
UPLINK FLX TO DATA
SELECT the data corresponding to the thrust to be used (MAX or FLEX or DERATED) by pressing
[4R]
SELECT the active runway data by slewing the pages (1/4... 4/4).
PRESS the [6R] key “INSERT UPLINK”
UPLINK MAX TO DATA, UPLINK FLX TO DATA and UPLINK DRT TO DATA pages are not
modifiable.
If the takeoff data displayed on this page are not relevant to the active runway entered in the flight
plan, the INSERT UPLINK prompt is not displayed.
When the takeoff data have been inserted, the PERF TO page is amended of the new data.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
AOC FUNCTIONS
A330/A340 FLEET DSC-22_20-70 P 7/10
FCOM 19 AUG 10
WIND DATA
Applicable to: ALL
REQUEST FOR WIND DATA
To send a wind request, press the “WIND REQUEST” selection key of any wind pages. This
request is automatically sent to the ground for one or more flight phases and for the selected flight
plan (primary or secondary). The content of the wind request message is not dependent on the
selected wind page (CLIMB, CRUISE or DESCENT) but on the flight phase in progress.
For the active flight plan or the secondary flight plan ‐ that is a “COPY ACTIVE”, a wind request
sent by the crew :
• during preflight or takeoff phase, initiates a demand for climb, cruise, descent and alternate
winds.
• during climb and cruise phase, initiates a demand for cruise, descent and alternate winds.
• during descent/approach and Go around, no wind request is possible.
‐ For secondary flight plan that is not a “COPY ACTIVE” there is no restriction linked to flight
phase.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
AOC FUNCTIONS
A330/A340 FLEET DSC-22_20-70 P 8/10
FCOM 19 AUG 10
When the amber star following the “WIND REQUEST” is not displayed, the FM is not able to
communicate with the ACARS and the pilot cannot send any request. When a temporary flight
plan is active or a DIR TO is selected, an uplink message cannot be displayed and the “WIND
UPLINK PENDING” scratchpad message remains displayed until the action is completed.
PROCEDURE TO INSERT WIND DATA
When the uplink message is received, the 2R field is modified, the amber “WIND REQUEST” is
replaced by the blue “INSERT UPLINK*”. This prompt, when pressed, enables the flight crew to
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 2(26)