曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

displayed on this overlay are normally the message. When the SEND overlay
obtained from the DTS cartridge. If DTS is displayed from the FIRE MISSIONS
data is not valid, the following defaults are thread, the JVMF Mission Summary
u s e d : FIXED WING=(4), HELO=(3), Page is displayed after the CONFIRM
ASSY=(2), PRSNL=(1), ARMOR=(0), SEND option is selected.
VHCLS=(1), ARTY=(2), ADA=(3), and
MORTAR=(4).
b. AIR CONTROL. This overlay (fig. 4-108)
f. ARTY PROJECTILE. Select the projectile provides the means to select the HF Mission
type from this overlay (fig. 4-108). Selection Lock Designator. Select an RHF option from
of an option transitions the display back to t h i s overlay to set the Mission Lock
the ARTY #N overlay. If the COPPERHEAD Designator to the selected mode and
option is selected, ARTY CONTROL is replace the ARTY CONTROL overlay with
automatically set to FFE/AMC/NORMAL. the previously displayed ARTY #N overlay.
Select TGT HANDOFF option to set the
3. AIR MENU. The AIR MENU (fig. 4-108) Mission Lock Designators to null and
overlay provides access to select and define replace the AIR CONTROL overlay with the
the air mission. This overlay provides the previously displayed AIR #N overlay.
4-236
TM 1-1520-248-10
Figure 4-109. Communications Functions Thread
c. AIR TGT LOC. Enter a waypoint identifier as RAPID. S e l e c t i o n o f SINGLE mode
a target location (fig. 4-108). Completion of transitions the display to the AIR #N
a valid entry (pressing MFK ENTER key) overlay. Selection of the RAPID mode
accepts the data and changes the HOG transitions the display to the MSL QTY
display to the previously displayed AIR #N (missile quantity) overlay.
overlay. The default target location is the
last stored target.
h. MSL QTY. Select the desired missile
quantity for the air mission (fig. 4-108).
d. AIR TGT QTY. Enter the target quantity Select a fixed option or manually enter a
manually or select one of the available
number in the range 1-60. The display
options (fig. 4-108). The display transitions
transitions to the AIR #N overlay.
to the TARGET TYPE overlay.
e. AIR TGT TYPE. Select a target type (fig. 4- 4-216. COMMUNICATIONS FUNCTIONS 108). The display returns to the AIR #N
overlay. THREAD.
Select COMM FUNCS from the START menu to display
f. AIR TGT ACTIVITY. This overlay (fig. 4-
108) provides the operator with a capability t h e Communications F u n c t i o n s t h r e a d . The
to describe the target’s activity. The display Communications Functions thread allows the operator
provides eight moving (MVG) options with a to observe the net status of the FM-1 and FM-2 radios
direction element and one stationary option. as well as determine the status of the Gateway. This
Select option to transition the display back thread also provides a means to join the nets monitored
to AIR #N overlay. by FM-1 and FM-2 radios.
g. AIR EMPLOYMENT DESIGNATOR. This 1. COMM FUNCS. This overlay (fig. 4-109)
overlay (fig. 4-108) provides the capability to provides the following information and
set the disbursement mode: SINGLE or capabilities:
4-237
TM 1-1520-248-10
a. GATEWAY. Displays the status FOUND or If both radios have not been joined to their nets and
NOTFOUND. A Gateway is associated with either the YES or the NO option has been selected, the
the Tactical Internet only. NET JOIN overlay changes to reflect that the FM-2
radio is not joined to its net by changing FM1 to FM2.
b. FM-1. Displays the net status of the FM-1 Selection of either the YES or the NO option a second
radio. Status consists of TI (Tactical time transitions the HOG display to the START overlay.
Internet), FS (Fire Support Net), or TAC If only the FM-2 radio has not been joined to its net
(TACFIRE) plus the radio’s net join status when the NET JOIN overlay is activated, the text
(GO or NOGO). indicates that the FM-2 radio is not joined to its net.
c. FM-2. This option provides the same
capability for FM-2 as described in the 4-217. SA FUNCTIONS/DATA THREAD.
previous paragraph for FM-1.
Select SA FUNCS/DATA from the START menu to
d. JOIN FM-1. If the FM-1 radio has not been display the Situational Awareness (SA) Functions/Data
joined to the net, the text (RQD) is displayed thread. This thread provides the ability to review
to the right of the text JOIN FM-1; otherwise friendlies information in the database and to configure
it is blanked. Selecting this option initiates the Filters and Advisory capabilities. The SA overlay is
the JOIN command. There is no separate accessed through the START overlay (fig. 4-110).
overlay display associated with this option.
1. TACID (DATABASE). This overlay (fig. 4-110)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(35)