曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

messages. The following options are 4-214. C2 MESSAGES THREAD.
provided on this display:
(1) REPLY. − The REPLY option appears Select C2 MSGS from the START menu to display the
as either REPLY (RQSTD) or REPLY. C2 MESSAGES thread. The Command and Control
(C2) thread (fig. 4-107) provides the capability to select
(a) REPLY (RQSTD). Select WILCO or message type, compose content, and transmit
CNTCO. Selection of the WILCO messages. Select one of the following message types:
option displays the REPLY CONFIRM pop-up. Selection of the CNTCO •• OOBWSNT APTOS
option displays the CNTCO RSN • SPOT
pop-up. • SITREP
• FREETXT
(b) REPLY (Not Requested). I f the • INFO RQST
REPLY (not requested) option is
selected, the FRAGO MSG ACTION 1. OBSTAT. Select OBSTAT (fig. 4-107) to
COMMENTS/REPLY pop-up (fig. 4- generate and send Observer Status report,
106) is displayed. which indicates cloud height and visibility in
(2) DELETE. − Select this option to delete the immediate area.
the message from the INBOX and IDM.
Accept CONFIRM DELETE to delete the a. VISIBILITY. Select a visibility option. The
message and return the display to the option selected is displayed on the OBSTAT
INBOX XX/YY page. page.
(3) FWD. − Select this option to display the
SEND overlay page. b. CLOUD HEIGHT. Select the cloud height.
(4) FWD W/COMMENTS. − Select this The option selected is displayed on the
option to display the FRAGO MSG OBSTAT page.
ACTION COMMENTS/REPLY pop-up
(fig. 4-106). c. SEND. Select SEND to transmit the
message ( r e f e r t o SEND THREAD
n. FRAGO MSG ACTION COMMENTS/REPLY. paragraph).
This pop-up (fig. 4-106) provides the
capability to send comments to the 2. OWN POS. This option causes a position
originator of the FRAGO message and to report to be generated and the display to be
forward the message with or without automatically transitioned to the SEND popcomments
to other addresses. up. (Refer to SEND THREAD paragraph.)
(1) Comments of up to 200 characters are
allowed. 3. SPOT. Select SPOT to generate and send
(2) SEND forwards the the comments to the the SPOT Report, which includes the
originator using the SEND pop-up. following information:
4-221
TM 1-1520-248-10
Figure 4-107. C2 Messages Thread (Sheet 1 of 4)
4-222
TM 1-1520-248-10
Figure 4-107. C2 Messages Thread (Sheet 2 of 4)
4-223
TM 1-1520-248-10
Figure 4-107. C2 Messages Thread (Sheet 3 of 4)
4-224
TM 1-1520-248-10
Figure 4-107. C2 Messages Thread (Sheet 4 of 4)
4-225
TM 1-1520-248-10
a. Line 2. Quantity observed, target type, and VHCLS=(1), ARTY=(2), ADA=(3), AND
identification class. Selection of this option MORTAR=(4). Selections from this page
transitions the display to the SPOT QTY transition the display to the ID CLASS
pop-up. overlay.
b. Line 3. Activity of the element and direction i. ID CLASS. Indicate whether the target is a
it is moving, if applicable. Selection of this friend (FRND), FOE, or unknown (UNK) (fig.
option transitions to the SPOT ACTIVITY 4-107). Selection of one of these options
overlay. transitions back to the SPOT display.
c. Line 4. This line contains the prepoint j. SPOT ACTIVITY. Select from the available
identifier for the current prepoint and options to describe the enemy’s activity (fig.
represents the default target location. 4-107). Selection of a option from this page
Selection of this option displays the SPOT transitions the display to the SPOT overlay.
LOCATION overlay and provides the
capability to change the target location. k. SPOT LOCATION. Select the waypoint to be
Following a target locate function, the referenced in the SPOT report. When this
current prepoint is equal to the result of the overlay is activated, the default waypoint is
target locate. the current prepoint. If a different waypoint
is desired, select this waypoint by using the
d. Line 5. The time this observation was made. MMS FOV switch to increment/decrement
Select this option to display the TIME the waypoint identifier. Selection of the WPT
ENTRY overlay. option transitions the display to the SPOT
overlay.
e. SEND. Select this option to transmit the
message. 4. SITREP. Select SITREP (fig. 4-107) to accept
or change selected items. The following
f. SEND W/CFF. Select to i n i t i a t e the options and information is provided on this
transmission of the message. This option display.
also commands the CDS to data fill the
target type, quantity, elevation, latitude, a. Line 2. Select # OF ROCKETS to activate
longitude, and other information that MFK entry and enter the number of rockets.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(31)