曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

entry mode is activated allowing the mission is selected, the HOG overlay is
operator to enter the identifier of the blanked and the appropriate JVMF Mission
desired waypoint. Selection of change Summary Page is displayed on the CPG
waypoint returns the displayed overlay MFD. The FIRE MSNS overlay provides the
to the previous displayed FREE TXT following functionality.
overlay.
(7) MAN TXT. − Enter a free text message a. ARTY #1 or #2. Transitions the HOG display
that is associated with the commanded to either the ARTY MENU overlay if the
4-227
TM 1-1520-248-10
mission has not been activated or the JVMF Selection of one of these options sets the method of
Mission Summary Page if the mission has fire, method of control, fire mission priority, and
been activated. transitions the display to the ARTY #N overlay. N is
either 1 or 2 for mission 1 or mission 2 and was
selected from the previous menu.
b. LAST. Transitions the display to last
selected Fire Mission. Overlay displayed is a. ARTY #N. This overlay (fig. 4-108) provides
dependent on whether the mission is the interface that allows the operator to
activated or not activated. select the type, quantity, location and type
of projectile for a given target. Also provided
c. AIR #1 or #2. Transitions the HOG display are the capabilities to select the firing
to either the AIR MENU overlay if the urgency and when the shot is to be fired.
mission has not been activated or the JVMF (1) Line 2. − Indicates the method of fire,
Summary Page if the mission has been method of control, and fire mission
activated. p r i o r i t y . Selection of this option
transitions the display to the ARTY
CONTROL overlay.
2. ARTY MENU. The ARTY MENU (fig. 4-108) (2) Line 3. − Contains the observed target
overlay provides access to select and define azimuth, observed target range, and
the artillery mission. This overlay provides six waypoint target number. Selection of
methods of fire from which to choose. this option transitions the display to the
ARTY TGT LOC overlay.
COPPERHEAD MISSION (3) Line 4. − Displays the target quantity
and generic type. Selection of this
IMMEDIATE SUPPRESSION (IMED SUPR) overlay transitions the display to the
FIRE FOR EFFECT/WHEN READY (FFE/WR) ARTY TGT QTY overlay.
MISSION
FIRE FOR EFFECT/AT MY COMMAND (FFE/
AMC) MISSION
ADJUST FIRE/WHEN READY (AF/WR) MISSION
ADJUST FIRE/AT MY COMMAND (AF/AMC)
MISSION
4-228
TM 1-1520-248-10
Figure 4-108. Fire Missions Thread (Sheet 1 of 6)
4-229
TM 1-1520-248-10
Figure 4-108. Fire Missions Thread (Sheet 2 of 6)
4-230
TM 1-1520-248-10
Figure 4-108. Fire Missions Thread - ARTY (Sheet 3 of 6)
4-231
TM 1-1520-248-10
Figure 4-108. Fire Missions Thread - ARTY (Sheet 4 of 6)
4-232
TM 1-1520-248-10
Figure 4-108. Fire Missions Thread - Airborne (Sheet 5 of 6)
4-233
TM 1-1520-248-10
Figure 4-108. Fire Missions Thread - Airborne (Sheet 6 of 6)
4-234
TM 1-1520-248-10
(4) Line 5. − Identifies the FFE projectile or
the FFE fuze. Selection of this option text AA#### (valid entry form is two
transitions the display to the ARTY letters followed by four numbers). Upon
PROJECTILE overlay. entry to this page the MFK entry mode
(5) SEND. − Select this option to initiate is activated and a cursor is displayed so
transmission of the message. When the that data can be entered. Completion of
SEND overlay is displayed from the a valid entry (pressing MFK ENTER
FIRE MSNS thread, the JVMF Mission key) accepts the data and changes the
Summary Page is displayed after the HOG display to the previously displayed
CONFIRM SEND option is selected. ARTY #N overlay.
(6) SEND W/SPOT. − Select this option to (7) Manual Grid Entry. − This overlay
initiate the transmission of the message. provides the capability to change the
This option also generates a SPOT target by manually entering a target
message that is sent to the currently grid. A valid entry consists of the text
selected recipients. When the SEND W/ AA-EEEE-NNNN (A = letter in range C
SPOT overlay is selected from the FIRE to X (except I and O), E and N =
MISSIONS thread, the JVMF Mission numbers in range 0000-9999). Upon
Summary Page is displayed after the entry to this page the MFK entry mode
CONFIRM SEND option is selected. is activated and a cursor is displayed so
that data can be entered. Completion of
b. ARTY CONTROL. This overlay (fig. 4-108) a valid entry (pressing the MFK ENTER
provides the means to change the method key) accepts the data and changes the
of fire, method of control, and fire mission HOG display to the previously displayed
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(33)